A4400 omnipcx defualt Flash Timing

[Janerose13]

Hi anyone know's what is the defualt flash timing of 4400 omnipcx. i forget it,

[frank]

I just did an installation, and this is what I got:




│ Off-hook Validation Time : 12 │
│ On-hook For Rotary Valid. Time : 40 │
│ Max.Dur.Active Phase : 10 │
│ Min.Dur.Active Phase : 1 │
│ Max.Dur.Inactive Phase : 10 │
│ Min.Dur.Inactive Phase : 1 │
│ Min.Dur.InterDigit Rotary : 20 │
│ Ground Button Valid Period : 10 │
│ Filtering After On-hook Dur : 40 │
│ Min.Dur Loop Break Hookflash : 10 │
│ Max.Dur.Loop Break Hookflash : 40 │
│ Rec.Gain For QDSP : 108 │
│ Rec.Send Gain For QDSP : 160 │
│ Send Gain For QDSP : 51 │
│ GDSP Echo B9 : 0 │
│ GDSP Echo B10 : 0 │
│ GDSP Echo B11 : 0 │
│ GDSP Echo B12 : 0 │

[iourid]

If you mean hookflash recognition on analogue cards (z32, SLI),it is 400 ms by default. I usually change it to 1 sec (value=100). Don't forget to reset analogue card for changes to take an effect.
System/Z Board Audio Parameters:
│ On-hook For Rotary Valid. Time : 100 │
│ Max.Dur.Loop Break Hookflash : 100 │