Commande for listing all trunk group in system

belkhiati · Post by **belkhiati** » 28 Dec 2009 09:28

Hi

Is there any one know the command to list all trunk group associating the N° of trunk , N° of Cpl,N° Board . I know the command list_faisc that associate the number of trunk , node ,the Pfx …. ) But not the N° of Cpl and N°Board .

Thanks and best regards

jasic · Post by **jasic** » 28 Dec 2009 10:29

I used first list_faisc and then i've a look to the trunk itself with the command trkvisu xx xx = trunkgroup

swinstation · Post by **swinstation** » 28 Dec 2009 12:24

try trkvisu all

OXE_4400 · Post by **OXE_4400** » 28 Dec 2009 13:10

Not exactly what You want:
trkvisu all

chicane717 · Post by **chicane717** » 28 Dec 2009 13:52

You could try trkvisu <trunk group ID>, for each trunk group on the system.

Sample:
xa000002>trkvisu 15

This command will return all the physical equipment (shelf, board, access, equipment) associated to the trunk group ID 15.

belkhiati · Post by **belkhiati** » 29 Dec 2009 02:12

thank you very much , this is just what I was looking for

enio.eltz · Post by **enio.eltz** » 29 Dec 2009 13:07

Hi

Try trkstat -r <act> <cpl> . -r is refresh. Maybe it isn't you want.

Best regards.

subva01 · Post by **subva01** » 30 Dec 2009 07:28

Hi ,

I am looking for command which displays the calls of T2-IP trunk group ,like Sipdump for Sip TG

Thanks and regards

Post by **frank** » 01 Jan 2010 11:31

Subva01:

motortrace 2
traced

is this what you want ?

subva01 · Post by **subva01** » 07 Jan 2010 00:01

I am looking for , no of calls active / inactive in a trunk group and on a specific trunk.
Trunk usage and Trunk Group usage
Is ther any command in OXE which can give this stats.

Thanks