Use of 4760I

Rens · Post by **Rens** » 29 Dec 2009 14:27

Hello,

Does anyone know if the 4760I still exist in release 9.1?

I cann't find the option "Use of 4760I" anymore.

┌─[ 30 ] Instances: System Parameters──────────────────────────────────────────┐
│                                                                              │
│ -> Law                                   Multi country                       │
│    Circuit Data Security                 Use virtual add on                  │
│    Intell Ovflw (MuAid) w/ remote ACT    Use add on for meet me conf         │
│    Dynamic Security                      Overflow entity if out of serv set  │
│    Force Type Identification Is On       No End Of Dialing                   │
│    Use profile with auto. recognition    Auto DTMF Incoming Call             │
│    % sets out of serv. trig. an alarm    Connect IP on switchover            │
│    % trunks out of serv. trig. alarm     Activate Emulation Without Pwd      │
│    IRC Flashing Duration                 Maximum Length for LDAP numbers     │
│    Initial called number used                                                │
│    A-law to Mu-law conversion                                                │
│    Phone Book overflow on LDAP server                                        │
│    N Conference Modularity                                                   │
│    Parity type for Z class set                                               │
│    Date/time in NS mess. (Ascom 9d24)                                        │
│    Forced Ringing on NS mess. (GAP+)                                         │
│    DTMF detect when signal drops                                             │
│    Overflow on OoS Extension                                                 │
│    9 Serie download time optimization                                        │
│    Maximum Capacity of MMS                                                   │
│    Static Electronic AOM 14 Keys                                             │
│                                                                              │
└──────────────────────────────────────────────────────────────────────────────┘

In release 9.0 you could find the option between "Phone Book overflow on LDAP server" and "N Conference Modularity". But now it seems to be gone.

In Technical communication 1244 concerning the release of 9.1 in paragraph 5.1 Applications, functionalities not supported by Release 9.1 it states:
Type of application: OmniVista 4760i
Migration to: mgr or OmniVista 4760

But in in OmniPCX Enterprise R9.1 Features List I find the following:

Code: Select all

							R6.2	R7.0	R7.1	R8.0	R9.0	R9.1
					
1.2.3.1. MANAGEMENT										
	Configuration :									
		A4760 (IP, PPP)				X	X	X	X	X	X
		A4760i (IP, PPP)			X	X	X	X	X	X
9.1.7. MANAGEMENT										
	Configuration with Wizard, 4760i and MGR	X	X	X	X	X	X

So, according to the official feature list, no changes there.

So any one any suggestions?

Regards,

Rens

Rens · Post by **Rens** » 29 Dec 2009 14:31

I guess I already found my answer:

OmniVista 4760i
This application is no more supported and can’t be activated anymore. Use mgr or OmniVista 4760 to configure the OmniPCX Enterprise. In case of upgrade to Release 9.1, the application will be deactivated, if previously activated.

Page 96 in Technical communication TC1244

Regards,

Rens

freedom · Post by **freedom** » 29 Dec 2009 19:17

I also noticed this "problem" when testing R9.1.... no good development in my opinion.
The 4760i was a very easy way to e.g. import default settings, even before the Omnivista 4760 was installed.
I don't know why Alcatel-Lucent has decided to deactivate this feature. Perhaps to sell more Omnivista 4760.

Hope Alcatel-Lucent will change their mind about this....

Post by **frank** » 29 Dec 2009 22:14

While testing 9.1, let us know if you find anything else.
R9 was a piece of #$*%(& with SIP TRUNKING...

alex · Post by **alex** » 30 Dec 2009 02:50

frank wrote:While testing 9.1, let us know if you find anything else.
R9 was a piece of #$*%(& with SIP TRUNKING...

Not only SIP TRUNKING.
I have customer with patch 31 initially installed - supposed to be stable, yeah?
5 eSRs written, just some of them are included in latest 37th patch - so this customer has a choice to decide which of these problems have minor importnace.

Rens · Post by **Rens** » 30 Dec 2009 09:27

Hello Alex,

Is it possible to post them in "Bugs & Security issues" so we can keep track of them?
I expected 9.0 to be quite stable.

Regards,

Rens

Post by **frank** » 01 Jan 2010 11:29

We have a lot of issues with 9.0 too
And with Alcatel's speciality of releasing a patch that breaks 5 things, we had nightmares lately. We now ask for hotfixes only, and we do not install real patch anymore..
sucks..

jasic · Post by **jasic** » 02 Jan 2010 05:06

Hope that the 4760i came back. It was a very importen feautre the install big systems

MrAnMo · Post by **MrAnMo** » 05 Jan 2010 15:16

I was looking for it today aswell and coudn't find it. Hmm this sucks. Now I have to install the complete 4760 packet on my labtop.

OXE_4400 · Post by **OXE_4400** » 06 Jan 2010 02:16

Ha, ha, ha.
I have upgraded company OXE to R9.1. 4760i was enabled in R9.0 and what You think does 4760i works on R9.1? You can try to answer in 3 times

)))
You can't believe, it works. I have connected to http://xxx.xxx.xxx.xxx ( cpu IP), choosed configuration. Don't forget about JAVA compatibility or You need modify nmc_env.properties file under /usr3/httpd/nmc/html .
PC have downloaded R9.1 DB structure from OXE on first connection and it looks that works !!!!!
Its correct that doesn't exist 4760i option in SYSTEM PARAMETERS, but You need to proceed some tricky procedure.
1. Create empty DB on OXE R8 or R9.0; 2. Enable 4760i; 3. Make DB backup and upload on R9.1.