SIP Trunk OXE <--> TrixBox

faty · Post by **faty** » 21 Jan 2010 05:53

Hello!!!!
I'm a beginner in VoIP. I'm working on a project with my school.
I have a OXE and a trixBox and I want to make a trunk beetween those two and I really don't Know where to start. Theer is so much options on the Configuration Tools of the OXE ( Trunk Group, Translation, SIP.....).
All the phones are on the same local network. I have IpTouch 4068, Softphones 4068 and X-Lite SIPPhones.*

My mail is dfaty@hotmail.com
thank u!!!!!

tincho.rn · Post by **tincho.rn** » 21 Jan 2010 09:09

Hi. You need to know how to configure only the SIP Trunk? What is the state of the OXE? Is it working? Is your IPtouch 4068 up? Regards.

faty · Post by **faty** » 21 Jan 2010 10:44

Hi!!! Yes, I need to configure the SIP Trunk, the OXE is working. All the phones are up on the OXE's side.

I have a TrixBox with X-Lite phones registred on it.

I need to configure the Trunk so that I can call from the OXE to the TrixBox.

Thanks

tincho.rn · Post by **tincho.rn** » 21 Jan 2010 13:47

Hi. It is very simple.
Firts create the Trunk Group. Using mgr-->Trunk Group. Choose a TG number, for example 1. Choose Type = T2, Remote Network = 10 (for example), Q931 = ISDN all Countries or ABC-F (please read tech doc for a detail description of difference). Just choose ISDN All Countries. T2 Specification = Mini SIP (4 x n channles) or SIP (60 x n channels).

Then, mgr --> SIP. Configure: SIP Gateway. SIP Subnetwork = 10, SIP Trunk Group = 1.

Then Create a SIP External GW. mgr --> SIP --> Sip Ext GW. Choose a number for it, for example 1. If you have just a little back ground of SIP you will configure this easily. You can use TAB to get help. Basically you need to define a user to register in the trixbox and define a user so as the trixbox can register in the OXE. You can bypass this. It is not necessary.

Under mgr --> Traslator --> Network Routing Table. Choose table 10, under Sip Ext GW put number 1.

After all, using mtcl account execute killall sipmotor

This is a very poor explanation. You can read the tech doc, there it is very well explain.

Regards.

faty · Post by **faty** » 21 Jan 2010 17:04

thank you so much!! I'm going to try it tomorrow as soon as I get to the lab.

arminas · Post by **arminas** » 23 Jan 2010 04:00

Hi,

when i try to create sip trunk first, oxe give me this error

CANCEL to close this window

Processing Failure
OBJECT -1: Trunk Group ID: No free Hybrid Bus Access

how can i solve this problem ?

thanks

cavagnaro · Post by **cavagnaro** » 24 Jan 2010 14:02

You need to modify OXEs parameters, do:
cdmao
cfgUpdate

And update the number of maximum trunks adding 100, reboot your OXE and try again.

faty · Post by **faty** » 25 Jan 2010 05:33

Hi!!!

I'm still not able able to call from the OXE to the TrixBox. But I can call from the X-Lite registred the TrixBox to the Alcatel Phones on my OXE.

faty · Post by **faty** » 25 Jan 2010 09:08

I'm able to call from the X-Lite phone registred on my TrixBox but I can't make a call from the OXE to the TrixBox.
We have tried with different attributes and parameters but there must be something that we are missing.

Can You please help me!!!

cavagnaro · Post by **cavagnaro** » 25 Jan 2010 19:36

What error do you get? What you have done so far? What does the logs say? We are not psychics