SIP trunk group

alex.marete · Post by **alex.marete** » 28 Apr 2010 10:10

Dear all,
I have recently purchase a license for 8 SIP trunks. OXE R9.0. Once I create a trunk group as per documentation i get the incident - no free hybrid bus access- i have modified the cfgUpdate but the results are the same.
Some idea?

Alex

Post by **oldboy** » 28 Apr 2010 23:44

Have you reset the PCX? Silly question i know but i thought i would ask it anyway

alex.marete · Post by **alex.marete** » 29 Apr 2010 03:50

Dear Oldboy,
I have done several resets and still the same.

Thanks

Post by **vad** » 29 Apr 2010 04:18

With cfgUpdate we can solve problem with "no more fictive trunks". But " no free hybrid bus access"?

sadim · Post by **sadim** » 29 Apr 2010 07:45

Hi,
How is the parameter Stand-alone seen by cfgupdate ?
If it is set to yes, try to change.

Best regards
Sadim

tincho.rn · Post by **tincho.rn** » 29 Apr 2010 09:26

Hi. Check the following TC. Perhaps has something to do with your problem. Regards.

Post by **vad** » 29 Apr 2010 23:00

In another words - how many trunks was added?

ifraembs · Post by **ifraembs** » 30 Apr 2010 04:50

Hello,
i knowe the Problem.
First in Actis you need the flag for SIP Multimode. If you have this you can see in the PBX unter cd /usr3/mao more hardware.mao
the PARA_MAO 5 this must be 0.
Then you can check the cfgUpdate.
cfgUpdate check the Trunks it must be 1000. If not cange it.

sadim · Post by **sadim** » 03 May 2010 04:05

Hi ifraembs,

You have reach same conclusion then me since para_mao 5 correspondes to the stand-alone value under cfgupdate.

Regards
Sadim

Post by **frank** » 05 May 2010 16:17

alex.marete, did you fix your issue ?