Calling line ID (Number)

[mabrgron]

Hello all

I hope someone can help me out.

The situation that I have is that our site spans 2 area codes, which have some NXXs that are local calls and some that are a long distance call.

Now the problem is when a long distance call comes in from one or the area codes into our system the system treats them all as Long distance by adding a 1 ahead of the NPA or treats them all as local.

Is there not a way for the system to get this information from the PRI.

On our previous system the system would look at the call coming in and see (in the d channel messaging) that the call is long distance or local

I hope this makes sense

It would be a nightmare to start imputing all the deferent NXX that are local to our sites.

There must be an easier way!

Thanking you all in advance..

[vad]

About calling line ID
You have "calling number" (you can see with "t3" trace).
And you have translator/ext. dialing plan/ ext. callback translation - this item convert calling number like you want (delete or add some digits).

But sometime we have problem with speed dial - during incoming call if number present in SD - you will have displayed name from SD instead of calling number.