CMIS reinitialization problem thus mgr log on does not work

[gulu]

Hi All,

we have an OXE with release 6.0.1 .At present we could not able to perform mgr command .Find below the error and incidents for this issue..

2)xb000002> mgr
ooo Reading string-file /DHS3bin/oneshot/mtcl/common.GEA ...
ooo Reading string-file /DHS3bin/oneshot/mtcl/objects.GEA ...
ooo Reading string-file /DHS3bin/oneshot/mtcl/objerrh.GEA ...
BIND error
panic: Can't initialize CMISE

(2)xb000002> incvisu -t 200

18/01/10 08:43:00 000002M|--/--/-/---|=2:2092=IPC:Th[23625-maoagent] send msg to Ac[747-#cmisd] GrpPort full=655360 35 (li)=3 max (2
18/01/10 08:43:30 000002M|--/--/-/---|=2:2092=IPC:Th[761-mailsys] send msg to Ac[747-#cmisd] GrpPort full=655360 36 (li)=4 max (32)
18/01/10 08:44:30 000002M|--/--/-/---|=2:2092=IPC:Th[23625-maoagent] send msg to Ac[747-#cmisd] GrpPort full=655360 35 (li)=3 max (2
18/01/10 08:45:00 000002M|--/--/-/---|=2:2092=IPC:Th[761-mailsys] send msg to Ac[747-#cmisd] GrpPort full=655360 36 (li)=4 max (32)


we tried to reinitialize CMIS but still does not work .if we perform a bascul it works for only one day then goes back to the same problem.

Can someone help me to sort this out.

Regards
Giri

[oldboy]

Are you connecting via V24 or telnet? Fropm what i can see it appears to be a config error with the V24 ports causing the ports to lock up. Is it a hotel install ? i have had a similar issue before

[frank]

From my past experience at the technical support, this used to be an issue on many site.
Each of them received a hotfix. You might want to upgrade to the latest patch available for this release..

[Eliott]

I guess it's solved (posted 2 weeks ago)
But next time try this:
netadmin -c
dhs3_init -R CMISD
dhs3_init -R MAOAGENT
You should see both fresh restarted with ps -ef command.
If it not works look for a blocked sqlsrv Process and kill it. (But be careful - there are different ones e.g. some for INTERNAL_TAX)
PS: Is is a BiCS?

[cavagnaro]

netadmin -c
dhs3_init -R CMISD

Hi Eliott,

Can you please explain what this does? the -c parameter doesn't appear in the netadmin help...

Thanks!

[Eliott]

With easy words it "reloads" the current configuration into the memory.
Especially the setup for the virtual / role interfaces could be lost in some
cases when changing something on the ETH config and netadmin -c will
reconfigure it correctly based on your settings. It's no problem to use it.