.wav file transfer for Dynamic voice guide

OXE_4400 · Post by **OXE_4400** » 25 Oct 2010 08:27

Everything OK with Dynamic voice guide recorded by 4035 set, file stored in /usr7/vg/dhs/ directory.
How to replace with .wav file transferred by ftp from PC?
File format (GPA2 case) correct - 8 bit, 8kHz, mono CCITT alaw.
I am trying to select it but OXE doesn't accept.

smileyman · Post by **smileyman** » 25 Oct 2010 11:34

Is this a file from Alcatel Audio Station (AAS)?

Best regards
smileyman

OXE_4400 · Post by **OXE_4400** » 25 Oct 2010 12:01

I have AAS. Tried with it, no clear idea. Exist some meniu for copying in AAS, can anybody to describe strict procedure.
Recorded by 4035 file contains comments at the end. Also exist somewhere in OXE link to recorded file.
Actually file is from flash file for SUVG flash image.

Turlupin · Post by **Turlupin** » 25 Oct 2010 12:30

Hi,

You should try with a 8khz 16 bits Mono wav file

Turlupin

OXE_4400 · Post by **OXE_4400** » 26 Oct 2010 01:54

Turlupin wrote:Hi,

You should try with a 8khz 16 bits Mono wav file

Turlupin

Are You sure? Recorded by 4035 files are stored in /usr7/vg/dhs/ in 8 bit, 8kHz, mono CCITT alaw format.

What correct sequence for file replacing?

MGR · Post by **MGR** » 26 Oct 2010 02:32

read in old forum below:
http://old.alcatelunleashed.com/viewtop ... 2Fvg%2Fdhs
there's a same discussion related with your topic i think

OXE_4400 · Post by **OXE_4400** » 26 Oct 2010 09:29

MGR wrote:read in old forum below:
http://old.alcatelunleashed.com/viewtop ... 2Fvg%2Fdhs
there's a same discussion related with your topic i think

Thanks, problem closed.