Identify basic access

[PabloR]

I try to find that basic access is failing, my surprise came when infocs appear only six of the eight basic access.

+-[ 8 ] Instances: Acceso TO/T1/T2-+
| |
| -> 3-6-0 |
| 3-6-1 |
| 3-6-2 |
| 3-6-3 |
| 3-6-4 |
| 3-6-5 |
| 3-6-6 |
| 3-6-7 |
| |
+----------------------------------+
+==============================================================================+
| T R U N K S T A T E Trunk group number : 3 |
| Trunk group name : rdsi |
| Number of Trunks : 16 |
+------------------------------------------------------------------------------+
| Index : 1 2 3 4 5 6 7 8 9 10 11 12 13 |
| State : F F F F F F F F F F F F F |
+------------------------------------------------------------------------------+
| Index : 14 15 16 |
| State : F F F |
+------------------------------------------------------------------------------+
| F: Free | B: Busy | Ct: busy Comp trunk | Cl: busy Comp link |
| WB: Busy Without B Channel| Cr: busy Comp trunk for RLIO inter-ACT link |
| WBD: Data Transparency without chan.| WBM: Modem transparency without chan. |
| D: Data Transparency | M: Modem transparency |
+------------------------------------------------------------------------------+

+---------------------------------------------------------------------+
| Synchronization on domain no 3 |
+---------------------------------------------------------------------+
| N_CR | N_CPL | TYPE | N_ACCES | PRIO | SYNC_CLOCK | TG/LK |
+---------------------------------------------------------------------+
| 3 | 6 | BRA 8 | 7 | 200 | SYNCHRO | TG:3 |
| 3 | 6 | BRA 8 | 6 | 200 | POT_SYNCHRO | TG:3 |
| 3 | 6 | BRA 8 | 5 | 200 | POT_SYNCHRO | TG:3 |
| 3 | 6 | BRA 8 | 4 | 200 | NOT SYNC | TG:3 |
| 3 | 6 | BRA 8 | 3 | 200 | POT_SYNCHRO | TG:3 |
| 3 | 6 | BRA 8 | 2 | 200 | POT_SYNCHRO | TG:3 |
+---------------------------------------------------------------------+

At what position in the BRA corresponds physically configured on the Oxe? Why only appear six basic access in infocs?

Thx!

[Eliott]

You can manage max. 6 acesses with sync prio.
Position 0 in managenent is Port 1 on the BRA.
So the first 2 accesses have no sync prio.
You could try to remove the sync from two other and put them on 0 and 1.