UA digital sets

Alcatel_exp · Post by **Alcatel_exp** » 11 Feb 2007 17:12

there was once a document in alcatel web site describe how to disable the ring signal in the handset of the digital set while in conversation while in conversation with another call and enables it in the telephone set speaker, can any one send it to me or explain to me the procedures and what parameters that i neet to set in the phone facility category?

Post by **frank** » 12 Feb 2007 23:31

Phone feature class of service: RINGING TONE IN HANDSET
0 by default so the beep comes out of the phone
1 to have the beep in the handset

Alcatel_exp · Post by **Alcatel_exp** » 22 Feb 2007 11:12

it only comes 1 short beep every 10 seconds, how can I control the time repetition of the beeps and to be shorter, or to increase the short beep to longer beep

sadim · Post by **sadim** » 22 Feb 2007 13:10

Hi,

Try to manage timer 88 and tone 60

Regards

Alcatel_exp · Post by **Alcatel_exp** » 25 Feb 2007 11:34

i checked timer 88 and tone 60 but has no eefect, also i checked timer 196 and timer 204 also no effect.

I checked it in different oxe releases also the same.

Could it be a fixed value and it can't be changed?

Any idea?

knightr1der · Post by **knightr1der** » 25 Feb 2007 13:44

I don't think this is a timer issue. I think it is a tone issue. Go through your tones ith the 'tone test' prefix and you will hear one that sounds like the tone you hear in your handset. Then modify that tone.

Hope that helps

Alcatel_exp · Post by **Alcatel_exp** » 26 Feb 2007 04:58

i thought also of this at the beginning and i tested all the tones and none of it is related.

only timer 204 has effect, the default value is 1 and if i increase it it will increase the cadance between each tone, but i need to decreases the cadance.

sadim · Post by **sadim** » 05 Mar 2007 07:03

Hi,
When you ear the bip, execute the cmd "represend d mcdu" (where mcdu=the set number where you ear the tone), and post the result.
The output sould be like:
Connections from neqt 765
-------------------------------------------------------------
| neqt cr cp,ts ... neqt |
|-------------------------------------------------------------|
| 765= 0 26,21 < Bip TONSURSON |
| 0 10,45 =1627 |
-------------------------------------------------------------

rick63 · Post by **rick63** » 13 Mar 2007 18:20

Hello, I think the syntax is "represent d mcdu".

If I am wrong be sure that I don't do this again.

sadim · Post by **sadim** » 14 Mar 2007 04:53

Yes, mi mistake.
Anyway it seems not to be important since there is no answer from Alcatel_exp for 2weeks

Alcatel Unleashed

UA digital sets

UA digital sets

represend ?