Qsig OXE to Siemens routing problem

[jj1511]

Hello
Had an "Alcatel OXE" Rel.7.1 networked via a Siemens QSIG everything ok. Did the "Alcatel OXE" on Rel.10.0 upgraded. Calls from the "Alcatel OXE" everything ok for Siemens. Normal call from Siemens for the "Alcatel OXE" is also ok. If a subscriber in the "Alcatel" call forwarding internally (eg. 5550 to 2278). Now the subscriber (5550) from Siemens will be called. the call is routed back into the Siemens and subscriber (2278) in the Siemens is called. (but the subscriber (2278) in the "Alcatel OXE" should be called)

Thank you


Jens
this is a Trace for my problem

trace jena siemens 2415 ruf 5550 uml 2278.txt