Sync problem with pabx via remote link T2

[youfo007]

hello,

I've posted on this forum a question about how I can configure a link between T2 4400 and Siemens HICOM alcatel 398.

Now, thanks to a number of tests and research on the net, I could solve this problem and finally the communication is established.

I noticed that the connection T2 remains in service during and after 15min almost falls out of service and is automatically restored after 5min.

I found that this is a problem with the synchronization.

A red alarm is triggered on the map INTOF "SYN".

My question is how I can solve this prob synch.

for your information my config on digital access alcatel side is that it is "SLAVE".

thank you

[alex]

Check "infocs" command.
Looks like your systems are not synchronized - they run on internal sources so after some time they completely out of sync.

[youfo007]

hi,

pieces joined in the editor control infocs

thanks

[youfo007]

hi


Image infocs here at the time of synchronization loss

[alex]

• Read System Documentation/System Services/PCX Synchronization chapter.
• Check for the latest patch of OXE version
• Check whether HICOM act a s a master of synchronziation

[youfo007]

hi,

indeed, this is what I do now, but there's a party in the documentation that I did not understand:

Read Documentation System / System Services / PCX Synchronization chapter.
Check for the latest patch release of OXE
Check Whether HICOM act asa master of synchronziation

how to check the latest patch

Siemens is in master

thanks.

[alex]

how to check the latest patch

Which version do you have? A string printed out on login something like R10.0-j1.410-bla-bla-bla

[youfo007]

hi

release 6.1 whith CPU6

[youfo007]

R6.1-f2.500-6-i-ma-c6s2

[alex]

You'd better check with the latest f2.502.33.a.