QSIG between PXE R10.1 and Tenovix 33XE - dont work

[jpissot]

Hi

An QSIG-GF trunk is configured between the Oxe R10.1 and the Tenovis.

I can call from the Oxe to the Tenovis. But I can't call from the Tenovis to the Oxe.

T3 traces:
______________________________________________________________________________
| (728393:000018) Concatenated-Physical-Event :
| long: 132 desti: 0 source: 0 cryst: 2 cpl: 7 us: 0 term: 0 type a5
| tei: 0 >>>> message received : SETUP [05] Call ref : 00 46
|______________________________________________________________________________
|
| IE:[04] BEARER_CAPABILITY (l=3) 80 90 a3
| IE:[1c] FACILITY (l=34)
| [91] Discriminator of supplementary service applications
| [aa] NFE (l=6):
| [80] Source Entity (l=1) End_PTNX
| [82] Destination Entity (l=1) End_PTNX
| [8b] Interpretation APDU (l=1): REJECT (2)
| [a1] INVOKE (l=20):
| Invoke Ident. : 00d6 (214)
| OP: 003b (59)
| [30] Sequence (l=11)
| [30] Sequence (l=9)
| [0a] Enumerated (l=1) 05
| [0a] Enumerated (l=1) 03
| [0a] Enumerated (l=1) 04
| IE:[1c] FACILITY (l=44)
| [91] Discriminator of supplementary service applications
| [aa] NFE (l=6):
| [80] Source Entity (l=1) End_PTNX
| [82] Destination Entity (l=1) End_PTNX
| [8b] Interpretation APDU (l=1): DISCARD (0)
| [a1] INVOKE (l=30):
| Invoke Ident. : 00d7 (215)
| OP: ECMA RO_CALLING_NAME (0)
| [80] Name presentation allowed (l=18) 'LIBRE - ACCES NUME'
| IE:[6c] CALLING_NUMBER (l=6) -> 00 80 Num : 5931
| IE:[70] CALLED_NUMBER (l=5) -> 80 Num : 1010
| [9d] Non-locking shift. codeset : 5
| IE:[31] EI_TRANSIT_COUNTER (l=1) 80
| [9d] Non-locking shift. codeset : 5
| IE:[32] EI_PARTY_CATEGORY (l=1) -> EXTENSION (1)
| IE:[7d] HLC (l=2) 91 81
|______________________________________________________________________________

______________________________________________________________________________
| (728393:000021) 1172: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 23 desti: 0 source: 15 cryst: 2 cpl: 7 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : REL COMP [5a] Call ref : 80 46
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=3) 80 e0 18 -> [e0] MANDATORY INFORMATION ELEMENT MISSING
|______________________________________________________________________________

Thank you for your help

[jpissot]

It works fine with this configuration:

Trunk:
DDI transcoding + False