Stand by CPU database update problem

[Kbregu]

Hi,

I have configured twin cpus on oxe r8.0.1 and redundancy is OK. Documentations states that the database of stad-by cpu is updated in real time. I have made several changes from the role CPU 192.168.0.12 but this changes are only reflected on the main 192.168.0.10. When i log into stand-by 192.168.0.11 changes do not exist.
Can anyone help with this thanks.

Usage : twin [Redundancy Cpu Enable (y/n)]
Role and CPU positions:
Role of the CPU : MAIN
CPU position : 06
CPU address : 192.168.0.10
Twin CPU position : 10
Twin CPU address : 192.168.0.11
Redundancy State:
Duplicated configuration : YES
Wished sig. transfer mode : C1 signalling channel
Used sig. transfer mode : C1 signalling channel
Transmission CPU-CPU : READY
Telephony redundancy : READY
monitel redundancy : READY
memloader redundancy : READY
All applications redundancy : READY

[Eliott]

What kind of changes?

[Kbregu]

Any change that i make to the database, users configuration for example.The only way to update the standby cpu is through mastercopy manual command.
Is this the only way to update database on standby cpu or it can be updated in real time?
Thanks

[Eliott]

Without Mao trace hard to analyze