Issue for sip link between two OXE

[Sam2009]

Hi
I have OXE-A R10.1.1 connect to OXE-B R9.1 via SIP LINK (12 link).
i need help for some issue about this link:
1- user name: At OXE-A i can see remote users's name when they call me. but at the other side OXE-B (R9.1) when I call anyone , my name didn't display at his set , only the extension.
for example. :
OXE-A user ( 2000 : Sameer ) & OXE-B user(3000 : Anas)
when 3000 call 2000 I can see this number B3000 and his name Anas ....but when 2000 call 3000 , he see this number only B3000 with out any name.

2- Call Barring: I configure route No. 2 to make calls to OXE-A . so all users at OXE-B can call any one at OXE-A.... How i can prevent some users at OXE-B to call OXE-A ???

[vad]

If you want forbide for some users display name - in phone feature COS for this user manage "Virtual set on CMP board=1".

For call barring - you can use Public network COS (forbide access to SIP TG) or connection COS.

[Sam2009]

thanks vad ,
for Call Barring i solve the problem , but regarding the display name , i check this features COS and found that the "Virtual set on CMP board=0" on Both PBXs , when i modify the value 0 to 1 , the PBX which was working well stopped displaying the name

is there any other parameters we need to modify

appreciate

[vad]

Sorry, not understand your questions (I think you want do not display name).
About name we have some points for management:
- system/ other system/ external signaling param - item Calling Name Presentation
- phone feature COS - item Calling name display (CNIP/I-CNAM)

And sometimes you can have problem from another object with name, f.e. speed dial.
If you have SD where you manage displayed name (f.e. B3000) and call number TG_prefix+1230000 when you receive call from user 1230000 - you will have B3000 on display (from SD parameters).

You can make a trace and check - what user name received (B3000, Sameer, 1230000...) and after this you will understand where (PBX-A or B) problems.