SIP transit call does not work with ars personal trk grp

[gfmtrade]

Hello can anybody help?

There is an OXE (Rel. 9.0) and a third party SIP gateway.
OXE has own ISDN (or SIP ) trunk.

Third party SIP gateway's user as softphone calls a number via OXE , and with "ars prof trk grp seizure " , Transit call work, OK

But if the Softphone from third party sip gateway calls with "ars personal trk grp seizure" than the call is rejected.

ISDN provider--------------OXE R9.1-------------------------EXT SIP GW (ABCF)
1:
caller: ext sip gw
called number 06123456
used prefix: ars prof trk grp seizure (ex:0,06123456)
transit call is working

2:
caller: ext sip gw
called number 06123456
used prefix: ars personal trk grp seizure (ex:9,0000,06123456)
transit call does not working

Thank You in advance for the help

[tot3nkopf]

Personal trunk group seizure for external user?

[gfmtrade]

Hi thank you for your response.
May be i did not understood your question .

The prefix (number 9) type is : ars personal trk grp seizure
then we dial a PIN code : 0000
then we dial : 06123456 this is an external number
in fact we got "reject" after 9.

Am I understandable.

[tot3nkopf]

My point is where would you configure a personal password for a user not configured on OXE?

[gfmtrade]

Dear tot3nkopf,
In the OXE there are more user defined with PIN code.
These codes (e.g. 0000) should work when we use "ars personal trk grp seizure" and acts as a user for transit calls but it seams in case of SIP trunk does not work.

[tot3nkopf]

That codes work only for extensions on which they are defined, at least in my understanding.
May be wrong but I think you cannot use personal trunk group seizure for transit calls (reason is above). You could use automatic substitution but I think that is a nightmare to configure.