RIP update issues OS-6450

[alonso.garcia]

Hi everyone, we have a network with a router/firewall connected to one 6400 and two 6450, everything was working fine (inter-vlan routing, Ip-phones and SIP trunking with PABX = OK) until we have decided to make some changes (to optimize Ip ranges including new network-segments), now the intervlan routing for the computers are functioning OK but for the Ip-phones we are getting a half way communication in certain VLAN when connected to other PABX via our SIP PABX trunking.
(internally the Voip is OK in all the segments)
I began to suspect about the RIP update tables and I've checked the RIP-tables in all the switches and they have the old RIP information ...I mean the new RIP tables have not been updated (we have created and modified the static-routes and RIP interfaces in the 6450 switches, so they should broadcast the RIP info among them ).
There is way to troubleshoot RIP in the OS-6450 and 6400?
Br
Alonso

[silvio]

Hi,
if your config is correct, than the best way will be a reboot of the switches in a downtime.
regards
Silvio

[alonso.garcia]

Hi Silvio, thanks for the info, we did that also , however after a deep search, we've detected another device in the network sending rip outdated information, now everything back to normal.
Regards