How to get remote T1 trunk via SIP

[hunggundam]

Hi Al,

I have OXE x 2 (R9.0) . It is established and work via SIP Trunk. May i know how to get PRA-T1 Trunk from OXE-2 (IP-Phone = 201)? Please advise which parameters need to modify?
OXE-1
PRA-T1 x 1
IP-Phone = 101
SIP Trunk x 8

OXE-2
IP-Phone = 201
SIP Trunk x 8

Thanks All

[haroun]

not clear
what are you using ars ? tg prefix seize
just allow at oxe -2 THE T1 TRUNKGROUP prefix seize at descimination level of the sip trunkgroup and manage the user public cos according to that so authorise area code zone , and connection between users and t1 tg compatibility set-tg.

fe
if 808 is prefix seize of T1 TRUNK SEIZE AT OXE1 create same as area code at sip trunkgrp descriminator at oxe 2
or better let sip trunkgp compatible with -1 And number of digit to send is 29 ( becareful in this case no descrimination or control applied to users whome had access to seize the T1 TG in this case)

by the way if sip tg is abcf protocl system automaticly assigns cos=31 for the tg this class is by default have no access to pstn