End of dialing timer

[sunder.J]

Hi,
I have a Qsig connectivity between OXE and Ericsson MD110 on PRI. I need the Timer value to reduce the end of dialing timer as there are multiple length of digits that are dialed from OXE to MD110 hence I couldn't manage the length in trunk group. The calling from OXE to MD110 is done through Direct speed dial .
Many thanks to help

[haroun]

becarefull it's timer 18,
or professional trunkseize without overlap prefix and use dynamic key -send -
or the end of dialling equivalent in most of case is #

[sunder.J]

Will timer 18 have impact in ISDN trunk . I tried to educate the customer on using # but he is not ok for it.

[cavagnaro]

Configure your discriminator with fixed lenghts, not 255. That will make the dial go out as soon as you reach the amount of numbers on each rule.

[haroun]

You're using dir abreviated number please post a sample of that DAN
may be you add # to reall the called number( tg prefix seize+destination number +#) under DAN

[sunder.J]

Yes, but I have variable length speed dial numbers DAN 52 & 53 have 5 digit length and DAN 00 has 2 digit for which I have used # at the end , Please find below the captures of sample DAN
Call Number : #2200#
Directory name : Enquiry
Directory First Name : --------------------
UTF-8 Directory Name : -------------------------------------------
UTF-8 Directory First Name : -------------------------------------------
Call Restrictions - Barring + False
Overfl.Dir.Spd Dl.No. Pref. : --------
Auto.Attendant Calling Right : 0
Call Type + Normal
Timed Forward.Dir.Spd.Dl.No. : --------
Range Number : 255
Can be Called/Dialed By Name + NO
Displayed Name : 00
External DISA Dir.No. : --------
--------------------------------------------------------------------------------------------
Direct Speed Dial No. Prefix : 00
Direct Speed Dial No. Prefix : 52

Call Number : #2252
Directory name : MD110
Directory First Name : --------------------
UTF-8 Directory Name : -------------------------------------------
UTF-8 Directory First Name : -------------------------------------------
Call Restrictions - Barring + False
Overfl.Dir.Spd Dl.No. Pref. : --------
Auto.Attendant Calling Right : 0
Call Type + Normal
Timed Forward.Dir.Spd.Dl.No. : --------
Range Number : 255
Can be Called/Dialed By Name + YES
Displayed Name : MD110
External DISA Dir.No. : --------
Phone book Name (Dial by name) : MD110
Phone book First Name : --------
----------------------------------------------------------------------------------------

Direct Speed Dial No. Prefix : 53

Call Number : #2253
Directory name : --------------------
Directory First Name : --------------------
UTF-8 Directory Name : -------------------------------------------
UTF-8 Directory First Name : -------------------------------------------
Call Restrictions - Barring + False
Overfl.Dir.Spd Dl.No. Pref. : --------
Auto.Attendant Calling Right : 0
Call Type + Normal
Timed Forward.Dir.Spd.Dl.No. : --------
Range Number : 255
Can be Called/Dialed By Name + NO
Displayed Name : #2253
External DISA Dir.No. : --------
------------------------------------------------------------------------------------------------------

[murraya]

hi, when you say variable length it looks like digit lengths are the same based leading number so you could set up a discriminator with 52 and 53 as length 5 and 00 as length 2.