OXE software error

[vad]

First question - Do you have another sets (analogue, digital) - and this sets can call outside? In another words - you have problem with outgoing calls or with 8068 set?
If you have only analogue sets (and outside calls Ok):
- try to press # after dialled number (or wait 5 sec) - call established or not?
- if yes - I think you use prefix 9 "prof TG seize" instead of "prof TG seize with overlap" (system wait - may be you want to use some ISDN feature - like sub-address). Change prefix meaning.

[quoctrang]

Dear Mr. VAD ,

thanks for your respond
My answer are as below :
- I have 16 analog sets , and these sets can make a call outside by pressing "9" + outside number
- I've tested with your suggestion : using analog set , press "9" + outside number , then press "#" , and call established
- I've changed the "9" prefix with " Professional trunk seize " , but still have problem twith IP Touch 8068

thanks and best regards

[vad]

About # - I say about 8068 - 9+number+# (or time out 5 sec).
Explain more exactly - what is your problem with 8068
You dial 9+number - you see - number on the display? After some time - what happen - disconnect, number not allowed...?

I hope - you manage entity number and Public Network COS for 8068 like for analogue sets.