Page 2 of 2
Re: 4058/4059
Posted: 25 Jul 2007 03:12
by soori1905
Hello,
Its available in the page no 8 of the TC0910. Please check if your PC is a part of those approved.
Re: 4058/4059
Posted: 25 Jul 2007 16:45
by Eliott_DUP
Patrick. wrote:Where can I find Info about these modifications?
Nowhere. But my info is:
It's a special modification in the BIOS for the keyboard chip.
It slows down the input speed to prevent a buffer overflow in the TA Box.
This modification is done for some HP and Compaq PC's only.
Re: 4058/4059
Posted: 26 Jul 2007 02:39
by Patrick.
Thx, but as you can see in my primary post we don't have a "Ta box" connected to our systems, we also do not connect a MMK keyboard. This system aught to work just fine without these extras, proof being a config running under Win95 since approx 6 years.
We are implementing a config as described in TC0910 page 19 "6.6. Connecting A4058 MIG Console" but with "6.6.2. On a 4035 set".
Re: 4058/4059
Posted: 30 Jul 2007 07:33
by OXE_4400
Exist new 4059 version 5.0.2
Re: 4058/4059
Posted: 30 Jul 2007 08:22
by serge
Any idea where this is available? Our supplier says their is no newer version availabale?
Re: 4058/4059
Posted: 30 Jul 2007 12:07
by OXE_4400
Don't trust.
Re: 4058/4059
Posted: 06 Aug 2007 02:20
by Patrick.
Hi,
Installed new version 5.0.2 but the problem persists.
Grtz,
Re: 4058/4059
Posted: 07 Aug 2007 17:12
by Lokol
hi! try an compatible hp mashine! it will work.... the developer (pierre verlet or so) say, he design it only for hp chips....
Re: 4058/4059
Posted: 07 Aug 2007 17:15
by torrentula
I have run 4059 on Dell boxes without problem. White boxes with 945 chipset normally do not work.
Compaq is definitely recommended
