Alcatel Unleashed

hahahahaha what was that!

OXE crystall hardware and VG board - us I undertand system was migrated from 4400. What ype of CPU do you have? If CPU6 - you can use VG function from CPU.

Thank you for your responses. The migration was a 4400 to Applicance Server with INT IP A card.
Maybe the solution is to change the VG board by a GPA2?

Thanks.

Are there any specs for pcmcia card reader/writer and for flash cards?
i've got reader specs and it says:
- 3.3V/5V
- 16/32bit
- PCI specification v.2.2
- type 1, 2 Card types
- Cardbus Master/Target protocol
- PCI Master/Target protocol
- Posting Write & Prefetching Read for PC Card bridge
- Supports 16-bit Legacy mode (3E0/3E2 I/O Port)
- Support Zoomed Video Port (Bypass type)
- ACPI & PCI Bus Power Management 1.1 compliant

will it work with AAS?

For read/write flash card we use notebook with PCMCIA slot under W'98 with SwapFTL2000 tool.

google does not know anything about that tool
any url?

right, it's no Swapftp2000, its 'swapftl 2000'

and for guys trying to search for pcmcia cards:

there are flash cards (that could have static VG) and ram cards (with LI batteries) with dynamic VGs (the later are better, huh).

from: TC0299, part numbers of flash cards (static VG storage):
− AMD : AMC004DFLKA
− INTEL : IMC004FLSA
− FUJITSU : MB98A21273
− CENTENNIAL : PM 24343 30100 35413 B FL04M
− SMART : SM9AMD4M002

orginal card reader/writer is:
SCM SBP-D2 PCI
(two port pcmcia card reader/writer mounted in floppy bay in front of the PC).

still no spec on DRAM/SRAM pcmcia card...