Alcatel Unleashed

Are you sure you are connecting to the right IP?
Can you post the result of "more /etc/hosts"? And mention the IP to which you are connecting?

Sorry to be late !!

My PC serveur is configured as "192.168.1.101"

(E)xa000001> more /etc/hosts
10.253.253.1 xa000000
10.253.253.2 xb000000
10.253.253.3 xma000000
10.253.253.4 xmb000000
10.253.253.10 adm000000_1
10.253.253.11 adm000000_2
10.253.253.20 app000000_1
10.253.253.21 app000000_2
192.168.1.201 xa000001 maincpu standcpu node000001 localhos
t
127.0.0.1 loopback
255.255.255.0 subnetmask
192.168.1.101 router defaultrouter

By any chance did you enable security while doing initial setup?

No I didn't !
This is my first VmWared installation, so I ve chosen the easiest way.

Well, FTP service is not running...why? no idea.
1. Try to restart and see any incidents coming up
2. Reinstall

OK, i ve reinsalled and every thing is allright !
Thank you cavagnaro.

Another satified customer

Hi friend,

that is my past problem. i had solution for you;

you start VM

Dont start telephone app

login as mtcl user

type comand: netadmin

then you setup IP for your CS (do step by step carefull)

now you can use any FTP software to connect it.

i had successed on this.

remind: default IP that VM installed is 10.253.253.1 but you can not FTP to it

remind: default IP that VM installed is 10.253.253.1 but you can not FTP to it

It's depend of which virtual interface you use with this VM.
You can modifie your virtual interface to have 10.253.253.10 IP address for example (but, when you load an OXE with a real interface, you can have problem if your 2 interfaces are in service).
Or, you can use 10.253.253.10 for real address on your LAN, and connect the VM with bridge on this interface.
In this case, you can use basic IP addressing on OXE.

G.