Page 1 of 1
OXE system time
Posted: 17 Apr 2010 04:18
by alex.marete
Dear all,
My system time is correct when checked in Swinst for both CPUs. Display on the digital sets show hours ahead or behind. NTP is not started. I don't use time update in PRI.
Anyone with and idea?
Good day
Posted: 17 Apr 2010 04:30
by murraya
have you checked the domain timezone for media gateway is the same or default as the timezone in swinst? also have you rebooted if you changed timezone?
Posted: 18 Apr 2010 02:11
by sera544
Hi alex,
We faced the same issue it's because of duplicated cpu, i don't how it get resolved exactly, set the time then u can do bascul from main to std.by and bascul from std.by to main, problem will be fixed...we call double bascul try it and let us know...
cheers,
Posted: 27 May 2010 01:16
by aponterules
you should try in mgr/system/consult modify
Posted: 14 Jul 2010 20:55
by frank
We had the same issue with a R9.1 , and the same solution for us as sera544: double bascule fixed it.
Posted: 12 Sep 2010 20:49
by mick405
I've seen this issue before too. And in all our cases running a double-bascul was the solution. Especially if you have changed the time zone in swinst.
We have found that when sites were installed they are left with a French DB which obviously has it's timezone set to change during the year with DST. If you're in a country in a different timezone to France/Paris then you're going to run into problems.
As suggested by aponterules check the time in mgr/system as well. I'm almost 100% sure (from memory) that this parameter is the one which affects the time displayed on your phone sets.
Get the CS's double-basculed.