Restore floppy periodic backup on different release of 4400

[akou_DUP]

I am facing a problem on a 4400 pbx with a really old version (B3.513). The pbx has a serious problem: I can not log in in any way (serial or ethernet) however the telephone application is still active. The pbx is on a big hotel and i am afraid to reboot the cpu without having a backup cpu with the configuration ready. The only backup that i have is a floppy disk with the periodic save. Unfortunately i cannot restore it because i do not have the B3.513 release and Alcatel doesen't either on the bussiness partner site. I have a B3.519 release installed and ready on a cpu. Is there a way to restore that floppy on my cpu so i can reboot the other cpu worries-free?
I could really appreciate some help!

Thank you

Argiris

[alurfe]

can you explain better the delivery, i have an old cd on b3.513.



best regards

[akou_DUP]

I guess that this is exactly what i need! Release 2.1 B3.513 for cpu3_2. Is there a way for me to obtain it? I would be grateful!

Argiris

[alurfe]

i load it in pastebin. i don't know if the cd is good.
i hope that can help you.



best regards

[alurfe]

ooops
sorry, i can't load it in pastebin. how can send to you ?
my mail isn't so great, that's 280 MBs.


best regards

[akou_DUP]

File received!
I will post tomorrow the results!
Thanks again.

Argiris

[alurfe]

don't forget to check the patch. is a good rule to have the same static and dinamic patch to restore a periodic backup.

best regards

[akou_DUP]

Ok, i'll try to check that...
I am still trying to find the procedure to load the cpu with that release.
It took me some time to realize that this version is way too old to work with pc-installer.
I will reply as soon as i find a solution to that.

Argiris

[alurfe]

in the cd you have the software under BOOTNET directory.

[akou_DUP]

The release works fine! Thank you for your help.
Problem solved!

Argiris