Page 1 of 1
Restore floppy periodic backup on different release of 4400
Posted: 14 Feb 2007 04:33
by akou_DUP
I am facing a problem on a 4400 pbx with a really old version (B3.513). The pbx has a serious problem: I can not log in in any way (serial or ethernet) however the telephone application is still active. The pbx is on a big hotel and i am afraid to reboot the cpu without having a backup cpu with the configuration ready. The only backup that i have is a floppy disk with the periodic save. Unfortunately i cannot restore it because i do not have the B3.513 release and Alcatel doesen't either on the bussiness partner site. I have a B3.519 release installed and ready on a cpu. Is there a way to restore that floppy on my cpu so i can reboot the other cpu worries-free?
I could really appreciate some help!
Thank you
Argiris
Posted: 14 Feb 2007 05:34
by alurfe
can you explain better the delivery, i have an old cd on b3.513.
best regards
Am i that lucky!?
Posted: 14 Feb 2007 06:47
by akou_DUP
I guess that this is exactly what i need! Release 2.1 B3.513 for cpu3_2. Is there a way for me to obtain it? I would be grateful!
Argiris
Posted: 14 Feb 2007 09:33
by alurfe
i load it in pastebin. i don't know if the cd is good.
i hope that can help you.
best regards
Posted: 14 Feb 2007 09:37
by alurfe
ooops
sorry, i can't load it in pastebin. how can send to you ?
my mail isn't so great, that's 280 MBs.
best regards
Posted: 14 Feb 2007 12:09
by akou_DUP
File received!
I will post tomorrow the results!
Thanks again.
Argiris
Posted: 16 Feb 2007 02:24
by alurfe
don't forget to check the patch. is a good rule to have the same static and dinamic patch to restore a periodic backup.
best regards
Posted: 16 Feb 2007 03:14
by akou_DUP
Ok, i'll try to check that...
I am still trying to find the procedure to load the cpu with that release.
It took me some time to realize that this version is way too old to work with pc-installer.
I will reply as soon as i find a solution to that.
Argiris
Posted: 16 Feb 2007 03:57
by alurfe
in the cd you have the software under BOOTNET directory.
Posted: 02 Mar 2007 14:14
by akou_DUP
The release works fine! Thank you for your help.
Problem solved!
Argiris