QSIG rerouting on Alcatel

darkman · Post by **darkman** » 01 Mar 2007 08:46

I have two stations - OXE R7.1 and Avaya S8300 with 2 bidirectional E1 links with QSIG protocol. All communictions is OK, but wa have one problem - call rerouting (another name - deflection) is not work. When call from OXE to Avaya is redirected by operator to OXE - we have two busy trunks.
In Avaya - QSIG rerouting is licensed and enabled. Can OXE support this function ?

Post by **tot3nkopf** » 01 Mar 2007 16:36

If Avaya redirects the call I don't see why Alcatel should support it.
Did you put a tracer on one redirected call to see what Avaya sends you? Maybe Avaya sends you something that OXE can't translate.
Also check the Connection Category between the 2 trunks in Avaya and OXE.

Regards.

knightr1der · Post by **knightr1der** » 01 Mar 2007 16:40

I think Darkman is after Route Optimisation.

You need to create a prefix for that feature from what I have seen. Though, I have never used it myself so I may be wrong.

alex · Post by **alex** » 02 Mar 2007 02:53

QSIG-GF call deflection is supported since Release 3.
Check with t3 what is send if redirection and how OXE reacts to that.

alurfe · Post by **alurfe** » 02 Mar 2007 04:04

check in SYSTEM if Route Optimisation is TRUE and create in TRANSLATOR/PREFIX the PABX ADDRESS in DPNSS (use a prefix with only numebrs not *,#, or A,B etc).
Trace with t3 the protocol on q-sig link.

best regards