secondary Ip address for alcatel OMNI PCX

swinstation · Post by **swinstation** » 21 Sep 2010 07:06

Hi all
is it possible to add secondary IP address for CPU?

I am looking a way for one of my customer,he has 150 iphone and they configured manually now he wants to connect a remote station in another city and doesn't want to change main IP address.because old IP is not in same range with GW.
so we are looking a solution for add new Ip address and GW too.with out netadmin or router modification.

old IP:192.168.8.10
new IP: 217.219.41.3
GW:217.219.41.1

I tried and I could give secondary IP address to CPU "in other range"and I could telnet or ping new one.but I had these problem:
1.after shutdown new ip address lost.
2.new Ip phone could not find secondary ip and gave t ftp error.
3.when I want to add new GW switch looks just netadmin "netdata file" and show sub networks error because are not in same IP address range,however I added new IP address.
any idea?

Post by **tot3nkopf** » 21 Sep 2010 10:41

Use routing for second site. OXE is not a router in order to configure several eth ports.

swinstation · Post by **swinstation** » 21 Sep 2010 11:44

thanks for your reply ,but i think we can give secondary IP for oxe and it works,I tried etc/sysconfig/router-static file for give static router for OXE in another range I will give my new information tomorrow.

Post by **tot3nkopf** » 21 Sep 2010 15:37

What are you going to do with INT-IP or GD's? Voice flow?

swinstation · Post by **swinstation** » 22 Sep 2010 01:09

I explain top of the page.

airwolf · Post by **airwolf** » 22 Sep 2010 12:17

You need to use a router at the remote site to send the IP phone to the OXE cpu, OXE cpu cant have 2 IP attached.

swinstation · Post by **swinstation** » 22 Sep 2010 15:44

please try in root account:
ifconfig eth0:1 x.x.x.x netmask x.x.x.x then you can telnet your cpu with another IP first IP exist and you add another ip with said command.

eth0=frist Ip has been configured on this device.
eth0:1= second ip will assign to this device.
after type ifconfig you will see both ip address

Post by **tot3nkopf** » 27 Sep 2010 07:17

This configuration is ok at linux level. Your call handling application has other config files that are configured using netadmin script. Of course your config might work, but I don't think ALU will give you support for that.