Using OXO release 4 over WAN connection

[prewest]

Hi,

i`ve got several OXO`s that we would like te manage over IP,
from release 5 through 7 it works perfectly after i forward port 443.

but on release 4 and below i can`t get it to work with only port 443.
i`ve also tried forwarding port 30020/30021TCP but without any succes.

the gateway that is set in the OXO is OK.

does anyone here know the corrects ports i need to forward to communicate with the OXO? or is this not possible on release 4 and below?

[enio.eltz]

Hi

R4 doesn't use port 443. R4 uses ports 30021, 31000 to 31002 in FTP mode. I've tried to do it too, but it hasn't worked. It doesn't work.

[prewest]

mmm to bad..

[krzysioD]

magic keyword: VPN !

[prewest]

and then what? replace all my customers routers that support VPN??!
no thanks..
and not all routers are managed by us...

[PuGZopf]

HI,

Alcatel OmniPCX Office configuration flow (FTP mode)
Protocol IP sources Ports sources IP destinations Ports destinations
TCP PC IP@ * CPU IP@ 30021
TCP CPU IP@ 30021 PC IP@ *
TCP PC IP@ * CPU IP@ 31000 to31002
TCP CPU IP@ 31000 to 31002 PC IP@ *

thats seems right.
IS FTP blocked on the router?

[gharekhy]

ISP uses NAT for WAN connection.? My ISP (Bell Sympatico) uses NAT on the WAN connection that connects me to the Internet. ( I assume to share public IP addresses between multiple subscribers) My Internal LAN uses the 192.168.0.0/24 subnet, and my router uses the 192.168.2.0/24 subnet as its WAN connection. My external IP address reads as a public IP address from websites.

[selectip]

Hi all,
I saw this subject and I will be really pleased if somebody could help me because I'm really going mad with maintenance over IP.
I install my pabx (R7 version) with:
On PABX: IP: 192.168.0.246 / Router: 192.0168.0.1
If I connect on PABX with PM5 on lan it works well.
Now I want to log on on the same PABX but from Internet.
So in my router, I use NAT to forward port 443 to 192.168.0.246
I use omc 8 with my external address but no chance, it does not work.
Any idea?
Thanks in advance

[enio.eltz]

Hi

Is 192.168.0.1 (oxo default gateway) the router LAN port?
If yes, your settings seems right. You can have a problem with the router. You can have a conflict of ports. Microsoft Exchnage web app uses the same port.

Regards.

[selectip]

Thx for answer but:
No because I test on 2 different sites with 2 different routers. I'm going mad. any idea please?