Public Network COS config

ShaneF · Post by **ShaneF** » 29 Mar 2007 08:21

Hi people

Our switch (OXE 4400) currently has bars in place for '09' prefix numbers.

If I want to enable a Public Network COS (3) to be able to use it, what things do I need to configure?

I have the 4400 documentation, but for some reason the section on call barring is missing...

Thanks

knightr1der · Post by **knightr1der** » 29 Mar 2007 08:50

you will need to go in to:

/Translator/External Numbering Scheme/NUmbering discriminator/0 public/discriminator rule - locate the 'call number' 09 and see what 'numbering area has been assigned to it. e.g. 9

Then go to:

/Categories/Access Category/3/public access category/9 and allow the access right for 'day' 'night' etc.. as appropriate

HTH

ShaneF · Post by **ShaneF** » 29 Mar 2007 09:05

Hi, thanks for that...

I dont have the Categories branch available though...

Shane
p.s: btw, we're on R6.0

knightr1der · Post by **knightr1der** » 29 Mar 2007 09:06

Oh, I think thats called 'Class of service' instead of category in that case

ShaneF · Post by **ShaneF** » 29 Mar 2007 09:21

Hey,

I thought as much and checked that, but looked fine.

I just had a brainwave though and thought to check their hunt group, and the setting is there too!

Changed that and all worked fine...

Thanks

knightr1der · Post by **knightr1der** » 29 Mar 2007 09:28

Hunt Group!!! I always forget that one! Good brainwave!

If you want, I'm pretty sure you can set that value to 255 in the hunt group and then the system would use the users setting. Useful if different members of the group need different access levels.