Page 1 of 1
Public Network COS config
Posted: 29 Mar 2007 08:21
by ShaneF
Hi people
Our switch (OXE 4400) currently has bars in place for '09' prefix numbers.
If I want to enable a Public Network COS (3) to be able to use it, what things do I need to configure?
I have the 4400 documentation, but for some reason the section on call barring is missing...
Thanks
Posted: 29 Mar 2007 08:50
by knightr1der
you will need to go in to:
/Translator/External Numbering Scheme/NUmbering discriminator/0 public/discriminator rule - locate the 'call number' 09 and see what 'numbering area has been assigned to it. e.g. 9
Then go to:
/Categories/Access Category/3/public access category/9 and allow the access right for 'day' 'night' etc.. as appropriate
HTH
Posted: 29 Mar 2007 09:05
by ShaneF
Hi, thanks for that...
I dont have the Categories branch available though...
Shane
p.s: btw, we're on R6.0
Posted: 29 Mar 2007 09:06
by knightr1der
Oh, I think thats called 'Class of service' instead of category in that case
Posted: 29 Mar 2007 09:21
by ShaneF
Hey,
I thought as much and checked that, but looked fine.
I just had a brainwave though and thought to check their hunt group, and the setting is there too!
Changed that and all worked fine...
Thanks
Posted: 29 Mar 2007 09:28
by knightr1der
Hunt Group!!! I always forget that one! Good brainwave!
If you want, I'm pretty sure you can set that value to 255 in the hunt group and then the system would use the users setting. Useful if different members of the group need different access levels.