OmniVista and eZ32 problem

Post Reply
sisob

OmniVista and eZ32 problem

Post by sisob »

Hi,

I have question regarding alarm. If eZ32 get hs status because the PSTN line from local line carrier is having problem (no voltage), can OmniVista detect this line problem (hs) on eZ32? Tks.
Top
vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3856
Joined: 23 Sep 2004 06:47

Re: OmniVista and eZ32 problem

Post by vad »

PSTN line must be connected with NDDI (NDDI-2) board - not with eZ board. To eZ32 you can connect analog phone.
Top
sisob

Re: OmniVista and eZ32 problem

Post by sisob »

Sorry, i made mistake, yes supposed NDDI2 not eZ32. So when the CO trunk line having problem, then the NDDI2 status will be hs. Can i get alarm notification at OmniVista that there is trunk line at NDDI2 board slot x is hs (out of service)? Tks.
Top
Post Reply

Return to “4760”