Page 1 of 1

Associated sets and voicemail .... part II

Posted: 16 May 2007 01:43
by JHades
Same question as a while ago, but they keep pushing it :roll:

I have 2 users: A and B. Both are associated sets of each other. But they are still not satisfied. Both want a voicemail on their number, but with following flow:

call on A >> doesn't answer >> call to assoiated set B >> doesn't answer >> call to voicemail

and .... the other way around: call on B >> .....

I can't get the calls to end on the voicemail system. I've tried forward on no reply to voicemail, but then the call doesn't get to the associated set.

I have adjusted following features:

* Phone Facilities: Voice Mail Forwarding = Ring Final Set Mail
* Timer 4 < Overflow Timer On no reply of Trunk

Some help would be appreciated.

Posted: 16 May 2007 10:04
by mgoegel
Simply the case of overflow A to B AND B to A shows an loop which is not allowed.
No chance to get this working.

Posted: 16 May 2007 12:10
by knightr1der
JHades,

You are going to have to use the magical 'Ghost Z'.

Call to A >> Ghost A (set supervised by user B) >> Voicemail

vice versa

Call to B >> Ghost B (set supervised by user A) >> Voicemail

Voila 8)

Posted: 16 May 2007 12:59
by tot3nkopf
Good description knightr1der: "magic Ghost Z". Nothing more true than that.

Posted: 16 May 2007 17:37
by knightr1der
tot3nkopf wrote:Good description knightr1der: "magic Ghost Z". Nothing more true than that.
Hey tot3, if it wasn't for the ghost (z) - I'd be dead :lol:

OK - on a more serious note JHades, please try and post messages under the appropriate heading. If you're unsure, stick it under MISC. I think its the least we owe to FRANK for setting this thing up for us :D