Page 1 of 1
Mobile 500 - I don't recevie any message
Posted: 03 Oct 2011 09:02
by jpissot
Hello,
I test a new mobile 500. I have configured the Emergency Call function.
When I configure with only a number, It's work, the number is called when i push on Emergency button.
But when I configure a text message and a number, it doesn't work. When I push on the Emergency button, any text message is received on my office phone.
The pabx is Oxe R7.0. My office phone is an 4035T. The mobile is declared as GAP+.
Thanks for your help.
Julien
Re: Mobile 500 - I don't recevie any message
Posted: 03 Oct 2011 21:55
by vad
Check - in your phone parameters allowed or no "Call by name and mini mail".
Re: Mobile 500 - I don't recevie any message
Posted: 04 Oct 2011 10:24
by jpissot
Call by name and mini mail is Yes.
Re: Mobile 500 - I don't recevie any message
Posted: 19 Oct 2011 03:00
by Eliott
>The mobile is declared as GAP+.
Don't believe that. DECT500 doesn't support GAP+ in my point of view. It's GAP only.
Re: Mobile 500 - I don't recevie any message
Posted: 20 Oct 2011 08:43
by jpissot
Yes, the mobile is not declared as GAP+ but GAP.
For informations : send/receive mesages is possible only if OXE is R10 and if you have IP-Dect base. It doesn't work with ibs and rbs.
Julien
Re: Mobile 500 - I don't recevie any message
Posted: 20 Oct 2011 08:56
by Eliott
I tought DECT-IP is planned to be released in OXE R10.1 ... or later ...
Re: Mobile 500 - I don't recevie any message
Posted: 03 Feb 2014 02:40
by mitchel70
The OXO Software must be Release 10.1 or 11
The Software for Mobile 500 must be SW 10.65
Re: Mobile 500 - I don't recevie any message
Posted: 03 Feb 2014 14:39
by cavagnaro
Thanks for the input but you noticed this is a 2011 post, right?
Re: Mobile 500 - I don't recevie any message
Posted: 23 Feb 2014 09:10
by Eliott
10.65 is GAP+ SW but with a number of restrictions. It is not the same Level of service as Mobile 400 or 8232 DECT.
Read carefully the Release note!
OXE has Minimum Versions to be used too.