Minimum requirement for release 10.0

[Xero]

hi,

I am going to migrate my OXE from Release 6.0 to Release 10.0 and i am not going to use the same CPU 6...i want to know the minimum hard disk and RAM requirements for release 10.0, is there any document for this information??

[murraya]

hi, max ram on cpu6 is 128Mb and max harddrive is 80GB. hard drives are only formated to 80 if the disk is larger.

[Xero]

thanks murraya...u mean 128 SD RAM??? not more than that?

[murraya]

yep, no need for any bigger than 128 SD.

[Dribbling-vole]

sounds like you know what you are talking about murraya.

how much physical room does it need also ?

I have an r10.0 DVD and it doesn't seem to fit on a CPU6 with 128 of ram, I have even tried spanning it across floppy disks but it still doesn't fit and it took 4 1/2 days of changing floppies to find that out. please help.

[murraya]

hi, you don't install the version via the floppy. check the DVD and you should find an application called "PC installer". install that to a PC and the use it to serve the CPU 6 via ethernet.

Try the search in this forum for information on installing software.

[Dribbling-vole]

Thanks Murraya. I still have the problem because the slotting for a DVD I can not find in the chassis. Can I solder a CD player to the backplane. I am careful.

(sorry for my english speaking as it is not my bestest language)

[Konstantinos.E]

hi


There is an section with Documentation! is not posible to tell you everything how to install it..with alcatel products you have to study..

[murraya]

I was almost going to give directions on soldering DVD to backplan

[Dribbling-vole]

so, if I can't get it off the DVD and you won't tell me how to connect the player to the chassis, is it possible to type it in ? I used to do that with my Commodore PET and VIC 20 for moon lander and well it worked.