Qos on 6602 won't work

[dogx010299]

Dear All,

I'm having a problem with the Qos settings.

Here's my scenario:

I have PC1 in vlan22 ip 192.168.22.2 connect to os6602 8/2
And PC2 in vlan33 ip 192.168.33.2 connect to os6602 8/3

My os6602 is connecting to another os7700, using static-route.
And my FtpServer link to os7700 in vlan55 ip 192.168.55.2

Bandwidth between os6602 and os7700 is 4MB.

I want to change the Priority with PC1 and PC2 to FtpServer (PC1 > PC2)

Here's my Qos settings:

->show configuration snapshot qos
!Qos:
Policy condition Con1 source ip 192.168.22.0 mask 255.255.255.0
Policy condition Con2 source ip 192.168.33.0 mask 255.255.255.0
Policy condition Con3 destination ip 192.168.22.0 mask 255.255.255.0
Policy condition Con4 destination ip 192.168.33.0 mask 255.255.255.0
Policy action Act1 priority 7
Policy action Act2 priority 0
Policy rule Rul1 condition Con1 action Act1
Policy rule Rul2 condition Con3 action Act1
Policy rule Rul3 condition Con2 action Act2
Policy rule Rul4 condition Con4 action Act2
Qos apply
->

Can anyone help me with my settings or tell me what's wrong wih my settings ?
When PC1 and PC2 both downloading data from ftpserver, Both PC1 and PC2 are 2MB.
But my setting is hope that PC1 can use more than 2MB when both PC1 and PC2 are downloading.

Thank you for your patient.

Best regards,
Andy

[one6f]

Hi,
here are some nice explanations:
Bandwidth restriction for specific priority queues,
Bridging Priority Video Traffic using 802.1P

[dogx010299]

Hi,
here are some nice explanations:
Bandwidth restriction for specific priority queues,
Bridging Priority Video Traffic using 802.1P

Dear one6f

thank you.

----
12/02/2012

I've tried many methods, But my problem still exist.

Maximum bandwidth works fine, but priority still can't work.

Dear all, thanks.

Best regards,
Andy