OS6850-u24x show ni problem

[Alexander]

Hi! I have Alcatel OS6850-U24X, but show ni prints wrong information:

Code: Select all

-> show ni
Module in slot 1
  Model Name:                    OS6802 24PT 10/100/1G ,
  Description:                   OS6802 24PT 10/100/1G ,
  Part Number:                   ,
  Hardware Revision:             A30,
  Serial Number:                 1,
  Manufacture Date:              DEC 04 2003,
  Firmware Version:              ,
  Admin Status:                  POWER ON,
  Operational Status:            UP,
  Power Consumption:             35,
  Power Control Checksum:        0x2906,
  CPU Model Type   :             Motorola MPC8248,
  MAC Address:                   00:00:00:00:00:00,
  ASIC - Physical 1:             BCM56504_B2,
  FPGA - Physical 1:             0019/00,
  UBOOT Version :                6.4.4.213.R01,
  UBOOT-miniboot Version :       6.4.4.213.R01,
  POE SW Version :               n/a

Microcode

Code: Select all

-> show microcode 
   Package           Release       Size     Description
-----------------+---------------+--------+-----------------------------------
Kbase.img         6.4.4.343.R01   18245119 Alcatel-Lucent Base Software
Kadvrout.img      6.4.4.343.R01    2864105 Alcatel-Lucent Advanced Routing
K2os.img          6.4.4.343.R01    1894439 Alcatel-Lucent OS
Keni.img          6.4.4.343.R01    5671549 Alcatel-Lucent NI software
Ksecu.img         6.4.4.343.R01     632027 Alcatel-Lucent Security Management
Kencrypt.img      6.4.4.343.R01       3437 Alcatel-Lucent Encryption Management

What's wrong?

[Alexander]

Additional info

Code: Select all

-> show microcode 
   Package           Release       Size     Description
-----------------+---------------+--------+-----------------------------------
Kbase.img         6.4.4.569.R01   18614259 Alcatel-Lucent Base Software
Kadvrout.img      6.4.4.569.R01    2878998 Alcatel-Lucent Advanced Routing
K2os.img          6.4.4.569.R01    1959603 Alcatel-Lucent OS
Keni.img          6.4.4.569.R01    5760585 Alcatel-Lucent NI software
Ksecu.img         6.4.4.569.R01     649215 Alcatel-Lucent Security Management
Kencrypt.img      6.4.4.569.R01       3437 Alcatel-Lucent Encryption Management

Code: Select all

-> show ni
Module in slot 1
  Model Name:                    OS6802 24PT 10/100/1G ,
  Description:                   OS6802 24PT 10/100/1G ,
  Part Number:                   ,
  Hardware Revision:             A30,
  Serial Number:                 1,
  Manufacture Date:              DEC 04 2003,
  Firmware Version:              ,
  Admin Status:                  POWER ON,
  Operational Status:            UP,
  Power Consumption:             35,
  Power Control Checksum:        0x2906,
  CPU Model Type   :             Motorola MPC8248,
  MAC Address:                   00:00:00:00:00:00,
  ASIC - Physical 1:             BCM56504_B2,
  FPGA - Physical 1:             0019/00,
  UBOOT Version :                6.4.4.213.R01,
  UBOOT-miniboot Version :       6.4.4.213.R01,
  POE SW Version :               n/a

Code: Select all

-> show chassis 

Chassis 1
  Model Name:                    OS6802 24PT 10/100/1G ,
  Description:                   OS6802 24PT 10/100/1G ,
  Part Number:                   ,
  Hardware Revision:             A30,
  Serial Number:                 1,
  Manufacture Date:              DEC 04 2003,
  Admin Status:                  POWER ON,
  Operational Status:            UP,
  Number Of Resets:              23
  MAC Address:                   00:d0:95:e0:21:14,

Maybe I need downgrade Uboot/Miniboot to 6.4.3.479?

U-Boot and Miniboot version 6.4.3.479.R01 is required for the 6.4.4.R01 upgrade and version 6.4.4.213.R01 is recommended in a mixed OS6850/OS6850E stacked environment.

I don't have stacked environment

Why my switch does not identifies itself correctly?

[Alexander]

In swlog I have found such string:

MON NOV 26 16:03:39 2012 INTERFACE info NI 1: Not enough MACs, 2 for 26 ports

What does it mean?

[Alexander]

Friends, only 2 interfaces on my switch have macs.
Example:

Code: Select all

-> show interfaces 1/13     
 Slot/Port  1/13 :
  Operational Status     : down,
  Last Time Link Changed : MON NOV 26 16:03:39 ,
  Number of Status Change: 0,
  Type                   : Ethernet,
  SFP/XFP                : Not Present,
  MAC address            : 00:00:00:00:00:00,
  BandWidth (Megabits)   :     -   ,  		Duplex           : -,
  Autonegotiation        :   1  [ 1000-F                       ],
  Long Frame Size(Bytes) : 9216,
  Rx              :
  Bytes Received  :                    0, Unicast Frames :                    0,
  Broadcast Frames:                    0, M-cast Frames  :                    0,
  UnderSize Frames:                    0, OverSize Frames:                    0,
  Lost Frames     :                    0, Error Frames   :                    0,
  CRC Error Frames:                    0, Alignments Err :                    0,
  Tx              :
  Bytes Xmitted   :                    0, Unicast Frames :                    0,
  Broadcast Frames:                    0, M-cast Frames  :                    0,
  UnderSize Frames:                    0, OverSize Frames:                    0,
  Lost Frames     :                    0, Collided Frames:                    0,
  Error Frames    :                    0

[devnull]

I habe multiple OS6850 updated to 6.4.4 (incl. Boot loader/miniboot) never had this issue. But i am not sure whther that where U24X.

Open try to update again.. or open a ticket (i'd probably to the later one)