Alcatel Unleashed

The #1 Worldwide board for technical support on Alcatel-Lucent Voice & Data gear.
https://alcatelunleashed.com/

Configure MyIC as Business user with OXE R

https://alcatelunleashed.com/viewtopic.php?t=21002

Page 1 of 1

Configure MyIC as Business user with OXE R

Posted: 11 Dec 2012 05:07
by sherif
Hi

I need to configure MyIC as a business user with OXE Release 10.0.
So can any one provide me with templates for the following files

Config.mac-address.xml
Profile.mac-address.xml
sipdata.mac-address.xml

Thanks

Re: Configure MyIC as Business user with OXE R

Posted: 12 Dec 2012 00:44
by alex12555
Here you are, but without guarantee ;-)
For me it is so "almost" perfect without the 8770!

I would only like to do the Factory Default on the 8082!

Have fun Alex


config.mac.xml:

Code: Select all

<?xml version="1.0" encoding="UTF-8" ?>
<settings>
	<setting id="DmEnetcfgSipFile" value="/sipdata.mac.xml" override="true"/>
	<setting id="DmEnetcfgOptionalFile" value="/config/custom.xml" override="true"/>
	<setting id="DmEnetcfgUpgradeFile" value="/config/profile.xml" override="true"/>
	
	<!-- NTP IP Address (CallServer) -->
	<setting id="DmEnetcfgSntp" value="xx.xx.xx.xx" override="true"/>
	
	<!-- Admin Password -->
	<setting id="DmAdminPasswd" value="*tx8000#" override="true"/>
	
	<!-- Enable SSH -->
	<setting id="DmSecucfgSsh" value="true" override="true"/>
	
	<setting id="DmAdmcfgUpdatePollingEnable" value="true" override="true"/>
	<setting id="DmAdmcfgUpdatePollingTimeout" value="3600" override="true"/>
	
	<setting id="DmAdmcfgCfgfilePollingEnable" value="true" override="true"/>
	<setting id="DmAdmcfgCfgfilePollingTimeout" value="200" override="true"/>
	
	<setting id="DmAdmcfgUpdateTimeEnable" value="true" override="true"/>
	<setting id="DmAdmcfgUpdateTimeStart" value="03:30" override="true"/>
	<setting id="DmAdmcfgUpdateTimeDelta" value="10" override="true"/>
	
	<setting id="CurrentEnetcfgSntpRefreshPeriod" value="3600" override="true"/>
	
	<!-- PC LAN Port Disabled / Enable -->
	<setting  id="LocalEthlcfgPcEnable" override="true" value="true" />
	
	
	
	
	<setting id="DmAdmcfgTimeZone" value="Europe/Brussels" override="true"/>
	
	<setting id="RegularResetActive" value="true" override="true"/>
	<setting id="RegularResetSchedule" value="7200" override="true"/>
</settings>
profile.mac.xml:

Code: Select all

<?xml version="1.0"?>
<profile>
	<name>Official BO</name>
	<key>./key.xml</key>
	<component>
		<name>weather</name>
		<version>0.0.1.1</version>
		<url>/config/repository/Weather-0.0.1.1.signed.zip_content/index.xml.weather.0.0.1.1.signed</url>
		<checksum type="md5">05a9ba3792b38e10e0432ef217afae95</checksum>
	</component>
	<component>
		<name>MyICPhone_8082_Release R250.01.010.3</name>
		<version>R250.01.010.3</version>
		<url>/config/repository/ICTouch_VHE_R250_01_010_3.zip_content/index.xml.signed</url>
		<checksum type="md5">e8fdb0de3279a8a3c6936105f21c8fae</checksum>
	</component>
</profile>
sipdata.mac.xml:

Code: Select all

<?xml version="1.0" encoding="UTF-8" ?>
<settings>
	<!-- SIP UserName -->
	<setting id="SIPUserName" value="1234" override="true"/>
	<setting id="SIPDeviceUri" value="1234" override="true"/>
	<setting id="SIPAuthenticationName" value="1234" override="true"/>
	<setting id="SIPGroup1DeviceUri" value="1234" override="true"/>

	<!-- Language EN
	<setting id="Language" value="0" override="true"/> -->
	<!-- Language DE -->
	<setting id="Language" value="5" override="true"/>
	
	<!-- Call Server IP -->
	<setting id="SIPProxyAddress" value="xx.xx.xx.xx" override="true"/>
	<setting id="SIPRegistrarAddress" value="xx.xx.xx.xx" override="true"/>
	<setting id="SIPServer1Address" value="xx.xx.xx.xx" override="true"/>
	<!-- <setting id="SIPPhoneStateNotifyUri" value="xx.xx.xx.xx" override="true"/> -->
	<setting id="SIPMessageWaitingIndicationUri" value="1234@xx.xx.xx.xx" override="true"/>
	<setting id="SIPAuthenticationRealm" value="xx.xx.xx.xx" override="true"/>
	<setting id="SIPGroup1AuthenticationRealm" value="xx.xx.xx.xx" override="true"/>


	<!-- SIP Display Name -->
	<setting id="SIPDisplayName" value="Name, first name" override="true"/>
	<setting id="SIPGroup1DisplayName" value="1234" override="true"/>

	<!-- SIP Password -->
	<setting id="SIPAuthenticationPassword" value="0000" override="true"/>
	<setting id="SIPGroup1AuthenticationPassword" value="0000" override="true"/>

	<setting id="SIPPhoneStateNotifyType" value="0" override="true"/>
	<setting id="SIPMaxCall" value="2" override="true"/>
	<setting id="SIPSipTransportMode" value="0" override="true"/>

	<setting id="ComLogSize" value="50" override="false"/>
	<!-- RTP Map -->
	<!-- <setting id="SIPPreferredVocoder" value="8;0;18" override="true"/> -->

	<setting id="SIPDtmfMode" value="2" override="true"/>
	<setting id="SIPGroup1DtmfMode" value="2" override="true"/>
	<setting id="SIPUseSeplos" value="true" override="true"/>


	<setting id="SIPForwardDurationNoreply" value="20" override="true"/>
	<setting id="TelephonyHideIdentity" value="false" display="true" override="true"/>
	<setting id="AgendaDefaultAppointments" type="TEXT" maiCategory="Application" category="Agenda" display="true" override="true" value="#" />

	<!-- dialing Rules -->
	<setting id="DialingRuleCountryCode" define="default" override="true"/>
	<setting id="DialingRuleAreaCode" define="default" override="true"/>
	<setting id="DialingRuleMinNumberLength" define="default" override="true"/>
        <setting id="DialingRuleExternalPrefixExceptions" define="default" override="true"/>

</settings>
custom.xml:

Code: Select all

<?xml version="1.0" encoding="utf-8"?>
<settings>
    <setting  id="HomepagePreviewMode" value="true" override="true"/>
    <setting  id="EnableWebappHotel" value="false" override="true"/>                                                                        
    <setting  id="EnableWebappVoicemail" value="8000" override="true"/>
    <setting  id="ScreenSaverDelay" override="true" value="600" />
    <setting  id="ScreenSaverBrightnessOff" override="true" value="8" />
    <setting  id="EnableEmailPreview" override="true" value="false" />
    <setting  id="EnableWebappProgkeys" override="true" value="false" />
    <setting  id="DmWebappDeploymentMode" override="true" value="OPEN" />
    <setting  id="EnableWebappWakeup" override="true" value="true" />
    <setting  id="EnableRoutingLed" override="true" value="true" />
    <setting  id="EnableAgendaCalendarPreview" override="true" value="true" />
    <setting  id="IsHelpAvailable" override="true" value="true" />
    <setting  id="ScreensaverSlideshowList" override="true" value="http://dmserver/dmictouch/pictures/myScreenSaverPicture1.jpg;http://dmserver/dmictouch/pictures/myScreenSaverPicture2.jpg;http://dmserver/dmictouch/pictures/myScreenSaverPicture3.jpg;http://dmserevr/dmictouch/pictures/myScreenSaverPicture4.jpg;http://dmserevr/dmictouch/pictures/myScreenSaverPicture5.jpg" />
    <setting  id="ScreensaverSlideshowLocked" override="true" value="false" />
    <setting  id="UserBackgroundPicture" override="true" value="http://dmserver/dmictouch/pictures/myBackgroundPicture.jpg" />
    <setting  id="SkinsList" override="true" value="Pep's,peps-Default,false#Classic,classic-Default,true#Harmony,harmony-Default,false#GreenUp,greenup-Default,false" />
    <setting  id="UserPhoto" override="true" value="http://dmserver/dmictouch/pictures/grobi1.png" />
</settings>

Re: Configure MyIC as Business user with OXE R

Posted: 16 Dec 2012 06:08
by sherif
Thanks Alex,
it works with me,

Re: Configure MyIC as Business user with OXE R

Posted: 19 Mar 2013 05:26
by manoj
I want to know that how can I upload these files?

Re: Configure MyIC as Business user with OXE R

Posted: 19 Mar 2013 22:19
by cavagnaro
DM again sir, PLEASE read documentation. Without you fully understanding the product there is nothing we can do to help you

Re: Configure MyIC as Business user with OXE R

Posted: 09 Apr 2013 09:19
by skipper-com
Alex, would you please explain the correct setup of config server and 8082? Is it possible to use HTTP server or nor only HTTPS)? If HTTPS, how have you created CTL file and deploy it to 8082's? What URL did you use for DM configuration in 8082 (just for example)?
Thanks

Re: Configure MyIC as Business user with OXE R

Posted: 09 Apr 2013 11:05
by skipper-com
skipper-com wrote:Alex, would you please explain the correct setup of config server and 8082? Is it possible to use HTTP server or nor only HTTPS)? If HTTPS, how have you created CTL file and deploy it to 8082's? What URL did you use for DM configuration in 8082 (just for example)?
Thanks
Thanks guys! No need answer more:)
I've found out that HTTP is enough for all (configs, upgrades, etc). Works fine with OXE w/o any 8770, formal DMs, OT or OXO.

Re: Configure MyIC as Business user with OXE R

Posted: 09 Apr 2013 11:47
by alex12555
I'm glad! ;-)

Re: Configure MyIC as Business user with OXE R

Posted: 08 May 2013 11:50
by manoj
Hi Skipper-com,
can you give the details that how you manage 8082 without 8770 and opentouch.....
All times are UTC-05:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited