Page 1 of 1
with the Ftp tool what password do I use to get to the usr3/
Posted: 27 Jun 2007 03:24
by Vantheman
Hallo all
Please help I need to get our omnivista 4760 working
I tried to connect with the ftp tool and extract out .sw4760 file to register it
but I only get to /usr2/mtcl/
and I need to get to /usr3/mao/ to download the xxxxx.zip file
Can Anybody help Please
posting.php?mode=post&f=14#
Re: with the Ftp tool what password do I use to get to the usr3/
Posted: 27 Jun 2007 03:27
by luckyme2
after ftp login do a :
lcd /usr3/mao
Re: with the Ftp tool what password do I use to get to the usr3/
Posted: 27 Jun 2007 03:33
by Wibble_2007
Do not go to usr3/mao, as this is the ACTIVE directory. If you need the file, backup your OPS and go to usr4/BACKUP/OPS
Re: with the Ftp tool what password do I use to get to the usr3/
Posted: 27 Jun 2007 03:38
by Vantheman
Thanks ,I using filezila to ftp to the system ,any suggestions on what ftp tool to use I do not want to kill my Pabx
Re: with the Ftp tool what password do I use to get to the usr3/
Posted: 27 Jun 2007 03:42
by luckyme2
filezilla is ok, just know what you are doing.
you can use the ftp from Windows too but that one is not so pretty
Re: with the Ftp tool what password do I use to get to the usr3/
Posted: 27 Jun 2007 03:46
by Vantheman
Thanks should I log in with the mtcl user and mtcl pass or do I need to use a
differant loggin,thank for the helphttp://
www.alcatelunleashed.com/posting.php?mo ... =14&t=2104#
Re: with the Ftp tool what password do I use to get to the usr3/
Posted: 27 Jun 2007 03:51
by luckyme2
use mtcl but with caution.
btw: Don't open several topics for the same question
Re: with the Ftp tool what password do I use to get to the usr3/
Posted: 27 Jun 2007 03:53
by Vantheman
Sorry will look out for that .thanks