IAP175 Radio port R1-2 (6) not works

Also known as OmniAccess Instant AP
Post Reply
danielsales

IAP175 Radio port R1-2 (6) not works

Post by danielsales »

I'm using two directional antennas 2.4 GHz 12 dBi gain.

Annex sending a photo.

I checked the manual and the antennas are connected on Radio 1 on ports 1 (R1-1) and 6 (R1-2) (2.4 GHz).

Tested switching the antennas between the ports 1 and 6. The antenna connected to port 1
always works, and antenna connected to port 6 never radiates the signal.

I tested the two antennas (one at a time) on port 1 and the two antennas work perfectly.
Top
Post Reply

Return to “OmniAccess Wireless Access Points”