Alcatel Unleashed

Hi guys

Just need your expert assistance on this matter.

We have a duplicated CPU7-2 configuration with us here. Its out of box for a installation.

The CPU A IP is 192.168.45.100 while the CPU B IP is 192.168.10.2

The CBRA board is connected without the Ethernet Link on the CPU Boards ON.

When we ping the IP of the CPU from the PC ( We have put the PCs in the same networks as the CPUs), we can't ping either of the CPU.

When we ping the IP of the CPU from the serial (local to the server), it can ping itself.

Requesting if you can give some ideas on this.

Regards

Tom

Is the the problem solved or still in work ?

I think problem solved (for both CPU managed IP addresses from one subnetwork).

Are these new from Alcatel-Lucent.... If yes than you need to set the security level by serial port?