Page 1 of 1
Stuck in miniboot and all LED port on
Posted: 05 May 2015 07:43
by mursid
Hi all,
I need advise, my 6250p24 and 6250-24 got stuck at miniboot command prompt and all LED for port are on.
kindly advise
thanks,
Mursid
Re: Stuck in miniboot and all LED port on
Posted: 06 May 2015 22:25
by slixxboy
what is your microcode?
-> show microcode
Re: Stuck in miniboot and all LED port on
Posted: 07 May 2015 02:41
by devnull
Can you post the boot-output (attach it here)
ist you can enter miniboot i would try to do a newfs to delete the flash and than reinstall the firmware using USB Stick or xModem.
If you can't do that rma the switches.
@slixxboy: Afaik there are no "show" commands in miniboot.
Re: Stuck in miniboot and all LED port on
Posted: 20 May 2015 03:36
by mursid
Hi devnull,
I attached the sysNewfs command as per your request.
Kindly advise
regards,
Mursid
Re: Stuck in miniboot and all LED port on
Posted: 20 May 2015 13:54
by silvio
Have you tried the next point from devnull: reinstall firmware?
Search the forum for similar posts f.e.
viewtopic.php?f=329&t=22616&p=83307&hil ... ery#p83307
regards
Silvio