Page 1 of 1

Service sap ingress /egress data throughput monitoring

Posted: 17 Jun 2015 11:14
by aman
Hi All,
Can anyone share some thoughts if Services sap ingress /egress data throughput monitoring is possible on 7750, 7705 and 7210 ALU products ?
If it is then what it is? Would "collect-states" be enough under sap ingress and egress to allow us the ingress /egress throughput monitoring on per service base?
Any thoughts would be greatly appreciated.
Aman

Re: Service sap ingress /egress data throughput monitoring

Posted: 25 Jun 2015 04:19
by mivens
Take a look at the TIMETRA-SAP-MIB.

You can SNMP poll objects in the sapBaseStatsTable for ingress and egress forwarded packets.

Re: Service sap ingress /egress data throughput monitoring

Posted: 25 Jun 2015 11:29
by rekeds
yep, we do sap monitoring from 7xxx series

Re: Service sap ingress /egress data throughput monitoring

Posted: 29 Feb 2016 02:16
by evans
Hallo,
kindly assist me the procedure of how to do this [ sap monitoring] via cacti i.e. Take a look at the TIMETRA-SAP-MIB. [ as you had indicated in your earlier post]

Regards,
Evans kipkemoi

Re: Service sap ingress /egress data throughput monitoring

Posted: 29 Feb 2016 08:38
by mivens
Here are some SNMP objects from the TIMETRA-SAP-MIB you could poll using Cacti for SAP ingress/egress stats. You'd need to create the XML configuration to add these to Cacti.

sapBaseStatsIngressQchipForwardedInProfOctets (.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.12)
sapBaseStatsIngressQchipForwardedOutProfOctets (.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.14)

sapBaseStatsEgressQchipForwardedInProfOctets (.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.20)
sapBaseStatsEgressQchipForwardedOutProfOctets (.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.22)

Re: Service sap ingress /egress data throughput monitoring

Posted: 07 Mar 2016 03:02
by Ahmed Dema
you can use PRTG application, just add the MIB's of 7705 in the MIBs of PRTG and then enable snmp with credential information on both side, then the PRTG can create a sensor depending on the port or SAP and read the ingress/egress also you can monitor the subnet it self,

Regards,
Ahmed Dema

Re: Service sap ingress /egress data throughput monitoring

Posted: 21 Mar 2017 09:48
by kibwana
Hi. Anyone with a working 7XXX SAP graphing template for cacti? That would be of immense help to me. Thanks.

Re: Service sap ingress /egress data throughput monitoring

Posted: 05 May 2017 08:59
by sayrus
I do via zabbix, but I do not have a template that will serve you since changing the position of the plates changes everything ... but you can use The Dude to get the OIDs with his snmpwalk

Re: Service sap ingress /egress data throughput monitoring

Posted: 26 Jun 2017 13:26
by shadowmaker
kibwana wrote: 21 Mar 2017 09:48 Hi. Anyone with a working 7XXX SAP graphing template for cacti? That would be of immense help to me. Thanks.
Hi everyone, I am looking for the same than Kibwana is.
If You can help me I will be gratefull.
Thanks in advance for any response.
Best Regards

Re: Service sap ingress /egress data throughput monitoring

Posted: 11 Jul 2017 01:36
by Oums
Hi all ,

Anynone working with sap for cacti (7750 and 7705 SAR-8) , many thanks for you help

thanks in advance

Regards