Page 1 of 1
AP 205H POE out disable
Posted: 14 Mar 2017 02:44
by mustafa.ahmad
We have installed the AP205H with controller 4450. we have to connected IP phone behind AP but there is no power. AP is connected behind the 6450-P48.
Please advise how to activate POE port to connect IP phone behind AP205H.
Regards
Re: AP 205H POE out disable
Posted: 14 Mar 2017 03:10
by silvio
inside the AP is a "normal" switch without POE. Only RAP3WNP (with own powersource) delivered POE.
You need powersupply for your phone or an injector.
regards
Silvio
Re: AP 205H POE out disable
Posted: 14 Mar 2017 04:38
by mustafa.ahmad
I am using AP305H
it has one in built POE port, mentioned in the docs
Re: AP 205H POE out disable
Posted: 14 Mar 2017 04:38
by mustafa.ahmad
sorry it s 205 H
Re: AP 205H POE out disable
Posted: 14 Mar 2017 17:19
by silvio
check in your OAW if poe is enabled.
wireless lan - your ap group > AP > Ethernet interface 1 port configuration > Ethernet interface link > POE
You are realy sure that you don't need an external powersupply at the AP? I haven't seen this AP until now.
regards
Silvio
Re: AP 205H POE out disable
Posted: 16 Mar 2017 03:18
by devnull
Also: From Datasheet the AP205 provides 5W maximum, so check that your phone does not use more power
(have not had such AP yet)