Alcatel Unleashed

mustafa.ahmad wrote: ↑04 Oct 2018 09:17 Also, if anyone can let me know where to find the IP compression type parameter that was in the Trunk group parameters in old releases.

because the STC SIP provider is saying that codec from there side is G711. In OXE , where do we exactly change the codec for trunk .

mustafa.ahmad wrote: ↑05 Oct 2018 01:19 Also they have told OXE is giving 403 forbidden response.

================================================================================

[No. ] 54
[TimeStamp ] 2018-10-04 17:13:34
[Direction ] SEND
[Msg Name ] OPTIONS
[Module No ] 190
[Local Address ] 10.200.0.7:5079
[Remote Address] 10.141.218.38:5060
[Hex Msg ] 4F 50 54 49 4F 4E 53 20 73 69 70 3A 31 30 2E 31 34 31 2E 32 ...


OPTIONS sip:10.141.218.38:5060 SIP/2.0
Via: SIP/2.0/UDP 10.200.0.7:5079;branch=z9hG4bKtu2ts4pa7abuduubppuhuakh2
Call-ID: kt4kfdbcskapth7477oocdckfb4ufsc2@SoftX3000
From: <sip:10.200.0.7:5060>;tag=bues7ttu
To: <sip:10.141.218.38>
CSeq: 1 OPTIONS
Max-Forwards: 70
Content-Length: 0




================================================================================

[No. ] 55
[TimeStamp ] 2018-10-04 17:13:34
[Direction ] RECV
[Msg Name ] 403
[Module No ] 190
[Local Address ] 10.200.0.7:5079
[Remote Address] 10.141.218.38:5060
[Hex Msg ] 53 49 50 2F 32 2E 30 20 34 30 33 20 46 6F 72 62 69 64 64 65 ...


SIP/2.0 403 Forbidden
Via: SIP/2.0/UDP 10.200.0.7:5079;branch=z9hG4bKtu2ts4pa7abuduubppuhuakh2
Record-Route: <sip:10.141.218.38:5060;transport=udp;lr>
Call-ID: kt4kfdbcskapth7477oocdckfb4ufsc2@SoftX3000
From: <sip:10.200.0.7:5060>;tag=bues7ttu
To: <sip:10.141.218.38>;tag=sbc0806sbcthLNQL6IlZBzIlBnza0ac0zp0IpVLpH6aHZaL
CSeq: 1 OPTIONS
Allow: INVITE,ACK,CANCEL,BYE,PRACK,NOTIFY,REFER,SUBSCRIBE,OPTIONS,UPDATE
User-Agent: OmniPCX Enterprise R12.0 m1.403.12.g
Content-Length: 0




================================================================================

[No. ] 56
[TimeStamp ] 2018-10-04 17:13:53
[Direction ] SEND
[Msg Name ] OPTIONS
[Module No ] 196
[Local Address ] 10.200.0.7:5084
[Remote Address] 10.141.218.38:5060
[Hex Msg ] 4F 50 54 49 4F 4E 53 20 73 69 70 3A 31 30 2E 31 34 31 2E 32 ...


OPTIONS sip:10.141.218.38:5060 SIP/2.0
Via: SIP/2.0/UDP 10.200.0.7:5084;branch=z9hG4bKdth2afh2o7ftdhu4et7f4d7c4
Call-ID: cadocoa2hfboke47scckh7tuhcfhohes@SoftX3000
From: <sip:10.200.0.7:5060>;tag=ckak22pa
To: <sip:10.141.218.38>
CSeq: 1 OPTIONS
Max-Forwards: 70
Content-Length: 0




================================================================================

[No. ] 57
[TimeStamp ] 2018-10-04 17:13:54
[Direction ] RECV
[Msg Name ] 403
[Module No ] 196
[Local Address ] 10.200.0.7:5084
[Remote Address] 10.141.218.38:5060
[Hex Msg ] 53 49 50 2F 32 2E 30 20 34 30 33 20 46 6F 72 62 69 64 64 65 ...


SIP/2.0 403 Forbidden
Via: SIP/2.0/UDP 10.200.0.7:5084;branch=z9hG4bKdth2afh2o7ftdhu4et7f4d7c4
Record-Route: <sip:10.141.218.38:5060;transport=udp;lr>
Call-ID: cadocoa2hfboke47scckh7tuhcfhohes@SoftX3000
From: <sip:10.200.0.7:5060>;tag=ckak22pa
To: <sip:10.141.218.38>;tag=sbc0804sbcthLNQpc6zHn0xccVzzHAL0nBc0BH0IlcZplZa
CSeq: 1 OPTIONS
Allow: INVITE,ACK,CANCEL,BYE,PRACK,NOTIFY,REFER,SUBSCRIBE,OPTIONS,UPDATE
User-Agent: OmniPCX Enterprise R12.0 m1.403.12.g
Content-Length: 0

mustafa.ahmad wrote: ↑07 Oct 2018 03:05 Hi Fery,

After adding the SIP provider IP in Trusted IP address , the incoming calls are working.

But the issue for both incoming and outgoing is same , one way audio..