OS6360-P10A lanpower FAULT
Posted: 17 Sep 2024 14:19
I have an OS6360-P10A which, as a result of a blackout that lasted several hours, the PoE stopped working (the switch is behind a UPS, but it didn't last so many hours). I have tried to restart the service, but it gives me these errors:
Code: Select all
alaPethPseFaultyPortNotification Trap raised when a lanpower port goes to FAULT stateCode: Select all
OS6360-P10A -> show lanpower slot 1/1
Port Maximum(mW) Actual Used(mW) Status Priority On/Off Class Type
--------+-----------+---------------+-----------+---------+--------+-------+----------
1/1/1 30000 0 Fault Low ON - ,-
1/1/2 30000 0 Fault Low ON - ,-
1/1/3 30000 0 Fault Low ON - ,-
1/1/4 30000 0 Fault Low ON - ,-
1/1/5 30000 0 Fault Low ON - ,-
1/1/6 30000 0 Fault Low ON - ,-
1/1/7 30000 0 Fault Low ON - ,-
1/1/8 30000 0 Fault Low ON - ,-
ChassisId 1
Slot 1 Max Watts 1200 Watts
Actual Power Consumed
120 Watts
Actual Power Budget Remaining
120 Watts
Total Power Budget Available
1 Power Supply Available'
*' appending port maxpower indicates 4pair port operating in 2pair modeCode: Select all
OS6360-P10A -> show powersupply
Total PSChassis/PS Power Type Status Location
-----------+---------+--------+-------------+-----------
1/1 165 AC UP Internal
Total 165