OXE with NTP keeps going backwards on time

[cavagnaro]

Hi guys,
I have configured my OXE to synchro with my AD Server NTPD service.

If I do a ntpq -p I get:

(101)xa001001> ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
192.168.90.20 .LOCL. 1 u 18 64 377 0.509 -200987 0.112

So I understand they synchronized however on my domain I have 12:00 for example and on OXE I have 12:04...

Any idea why???

Thanks

[torrentula]

What's the system release?

[cavagnaro]

Hi torren,
Release is R7.1-f5.401-29-a

Any idea?

[tincho.rn]

I have the same problem with R8.0.1.

[tot3nkopf]

Are you sure you haven't ticked "date and time update" on the digital access under board for one of your digital trunks?

[cavagnaro]

Yup Tot,
Mine is:

Access Type + T2 │
│ Board type + BPRA2 │
│ Synchronisation Priority : 200 │
│ Network Mode + NO │
│ Max Nb Of Used B Channels : 30 │
│ Max_Nb_Of_Compressed_B_Channels : 0 │
│ TieLine Mode + YES │
│ With Alarm + NO │
│ Reserved1 + NO │
│ Reserved2 + NO │
│ Network Date Time Update + NO │
│ CRC4 + NO │
│ Mu Law for BEARER CAP + NO │
│ │

[tot3nkopf]

hmm... so NTP issue...

[torrentula]

Unfortunately Alcatel has a real hard time getting a simple protocol like NTP to work. I have seen problems with NTP in almost every release.

[cavagnaro]

I'm thinking to getting my hands on the linux core however not sure how it will affect the system...
Tincho, have you tried it?

[tincho.rn]

Hi Cav. I will test in my lab as soon as possible, I didn't have time yet. I will upload results. regards.