T2 Alarm on Alcatel for 20 Sec

Post Reply
sharma.birjesh

T2 Alarm on Alcatel for 20 Sec

Post by sharma.birjesh »

I am using alcatel version R7.1-f5.401-17-b-in-c0

My problem is i gets T2 Alrms on my PRI lines for 20 sec but no call drops

03/03/09 16:47:24 000000M|02/04/0/001|=4:2112=AIS alarm on T2 access
03/03/09 16:47:24 000000M|02/04/0/001|=2:0310=T2 Dlap Released
03/03/09 16:47:44 000000M|02/04/0/001|=5:2102=T2 access back to normal
03/03/09 16:47:44 000000M|02/04/0/001|=4:2113=T2 lapD not established still trying
03/03/09 16:47:44 000000M|02/04/0/001|=5:0311=T2 Dlap Established


AS in above logs also lines went down for 20 sec but none of the call dropped.



Can any body help me out on this
tincho.rn

Re: T2 Alarm on Alcatel for 20 Sec

Post by tincho.rn »

Hi. AIS alarm is related with the service provider. Regards.
sharma.birjesh

Re: T2 Alarm on Alcatel for 20 Sec

Post by sharma.birjesh »

tincho.rn wrote:Hi. AIS alarm is related with the service provider. Regards.

NO I am sure that this problem is not because of S.P as I have more than 6 Alcatel 4400 at diff location and all of them facing the same problem after upgrading with the version 7
sharma.birjesh

Re: T2 Alarm on Alcatel for 20 Sec

Post by sharma.birjesh »

I am sure problem is not becaause of S.P as i have tested the lines
torrentula

Re: T2 Alarm on Alcatel for 20 Sec

Post by torrentula »

Have you checked your synchronization configuration? Use the infocs command to check it...
Gedeon

Re: T2 Alarm on Alcatel for 20 Sec

Post by Gedeon »

Check your board configuration (ie CRC4, or Trunk COS temps).

G.
engineerishaque

Re: T2 Alarm on Alcatel for 20 Sec

Post by engineerishaque »

Hello Sharma, is ur issue resolved? i am having the same problem with release 7 and the same incidents.
aho2009

Re: T2 Alarm on Alcatel for 20 Sec

Post by aho2009 »

Good morninig, I have a same problème with a release : 8.0 patch 27, can you give me the solution for this problem !!!
thanks
Post Reply

Return to “System”