Page 1 of 1
GA cannot be in service
Posted: 13 Apr 2006 19:54
by kenzo_DUP
Any reason why GA card cannot initialise
Posted: 13 Apr 2006 22:57
by vad
Absent IP connection with CS or not decleared MAC address in management. Or not installed right software.
You can connect V24 (like CPU) and check what wrong.
Posted: 14 Apr 2006 00:57
by kenzo_DUP
I cannot log in to it using V24
Posted: 14 Apr 2006 10:43
by frank
Did you assign the IP address in the ethernet management ?
Posted: 14 Apr 2006 20:11
by kenzo_DUP
i cannot go to mgconfig to configure
Posted: 15 Apr 2006 14:15
by cavagnaro
YOuy should first configure it under your CS (mgr)
When you reset the board what incident shows up?
Can you post your config?
Posted: 16 Apr 2006 13:18
by frank
Configure the IP address from the CS
Shelf / Board / Ethernet configuration
Put the mac address, and the IP, and reset the board..
Posted: 16 Apr 2006 20:58
by oldboy
Dont forget to do lanpbxbuild so it can download the binary
