HI
i have tow trunk group connecetd to tow QSIG voice cisco .
Can any one help me to manage the Overflow trunk when i had one trunk down of the tow
Thanks
Overflow trunk group
Re: Overflow trunk group
ARS route to a second TG may help you.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
ACFE OXE R12
ACFE OXO C R3
Re: Overflow trunk group
you have many possibilities:
1) if user dial TG prefix + number - you can manage overflow TG in initial TG parameters (some limitation - called/calling number will be like for initial TG)
2) if used ARS prefix. In ARS route manage second route and add this route in time-based route list
3) if used SD (Speed Dial) - manage Overfl.Dir.Abbrev.No Pref. in SD. F.e.
- you dial 3xxx to reach some one via QSIG
- used SD "3" with call number "TG_QSIG_seizure+3"
create SD "D3" with call number "another_TG+3"
declare D3 in item Overfl.Dir.Abbrev.No Pref (in SD "3").
When you dial 3xxx - number 3xxx will be dialled via QSIG, if with QSIG TG exist problem - will be used SD "D3".
1) if user dial TG prefix + number - you can manage overflow TG in initial TG parameters (some limitation - called/calling number will be like for initial TG)
2) if used ARS prefix. In ARS route manage second route and add this route in time-based route list
3) if used SD (Speed Dial) - manage Overfl.Dir.Abbrev.No Pref. in SD. F.e.
- you dial 3xxx to reach some one via QSIG
- used SD "3" with call number "TG_QSIG_seizure+3"
create SD "D3" with call number "another_TG+3"
declare D3 in item Overfl.Dir.Abbrev.No Pref (in SD "3").
When you dial 3xxx - number 3xxx will be dialled via QSIG, if with QSIG TG exist problem - will be used SD "D3".
